28
5. FIRST START
5.1. Turning on easyWallbox
The device does not have start/stop buttons. Once installed, it is ready to
charge when there are the following conditions:
correct installation, carried out following the instructions in this manual
regular status of the device.
Danger of electric shock when the device is damaged.
Use of a damaged device may generate electrical discharges.
If the device is damaged, follow the instructions below precisely to avoid
dangerous situations, with the resulting damage to persons or things:
avoid using the damaged device
clearly indicate the damaged device so that other people will not use it
call qualied personnel promptly so that the device can be repaired or, if
irreparably damaged, taken out of service.
To Next Page
Loading...
