Free2Move eSolutions easyWallbox - Page 357

35
8.1. Ordinary maintenance Intervals
easyWallbox does not require specic maintenance. However, it is
recommended to:
 always insert the connector into easyWallbox when the device is not in
operation
 we advise regular cleaning of the plastic case with a damp cloth
 we advise a regular inspection and cleaning of the connector only after
removing the power supply
 avoid cleaning with aggressive solvents or abrasive materials
 carry out a visual inspection of the device to note defects at every charging
session
 carry out a visual inspection on the recharging cable at every charging session
 carry out a visual inspection on the power supply cable at every charging
session and, however, before any connection to the power supply
 If the power supply plug is removed from the socket, please place the cable
tidily, if necessary by rolling it around the case of easyWallbox. Anyhow, the
cable must be placed in a safe manner, where it does not obstruct anyone
and cannot be damaged (e.g. pressed by vehicles)
 control of operational readiness.
easyWallbox does not contain components that the user can repair
or maintain autonomously.
The only part that can be removed from easyWallbox is the removable
cover, only during the installation and dismantling phases and
following the instructions. easyWallbox should not be opened further
unless by qualied personnel during Power Upgrade installation,
dismantling or maintenance.