Need help?Do you have a question about the Free2Move eSolutions ePublic and is the answer not in the manual?
Defines the intended application and operational scope of the charging solution for electric vehicles.
Provides contact information and resources for customer assistance and further technical information.
Details specifications, electrical parameters, dimensions, protection ratings, and certifications of the equipment.
Explains hazard symbols, safety icons, and key terminology used throughout the manual for clarity.
Details the physical size, weight, and key components of the charging station for installation planning.
Outlines the correct methods for operating the equipment and essential safety requirements for users.
Provides guidance on safe handling, transport, and storage procedures for the product.
Lists prerequisites, safety checks, and environmental considerations required before commencing installation.
Specifies the essential tools and equipment necessary for performing the installation.
Lists all components and accessories included in the product packaging for verification.
Defines optimal placement, environmental requirements, and necessary clearance for the charging station.
Details the procedure for safely unpacking the charging station and checking for any transit damage.
Provides instructions for mounting the anchor plate securely into fresh concrete.
Guides on correctly mounting the charging device onto the prepared anchor plate.
Covers the general steps and safety precautions for installing the charging station unit.
Explains the procedure for correctly connecting the main power and earth cables to the station.
Details the process for connecting communication cables, such as Ethernet, for network connectivity.
Describes final installation steps, including resetting switches and enabling the power supply.
Covers essential checks and procedures to perform before initiating an electric vehicle charging session.
Explains the step-by-step process for charging an electric vehicle using the station.
General| Number of Charging Points | 1 |
|---|---|
| Maximum Charging Power | Up to 22 kW |
| Input Current | Up to 32A |
| Communication Protocol | OCPP 1.6 |
| RFID | Yes |
| Protection Rating | IP54 |
| Warranty | 2 years |
| Category | Automobile Accessories |
| Mounting Type | Wall |
| Charging Standard | Type 2 |
| Input Voltage | 400 V AC |
| Connectivity | Ethernet, Wi-Fi, 4G |
| User Interface | LCD Display |
| Operating Temperature | +50°C |
| Type | Charging Station |
| Compatibility | Electric Vehicles with Type 2 connector |
To Next Page
