To Next PageTo Next Page
Need help?Do you have a question about the Freedom Stoves The INDEPENDENCE PS21 and is the answer not in the manual?
General| Fuel Type | Wood |
|---|---|
| Maximum Log Length | 18 inches |
| Efficiency | 78% |
| Flue Outlet | 6 inches |
| Burn Time | 8 hours |
| EPA Certified | Yes |
| Material | Steel |
| Firebox Size | 2.1 cu. ft. |
Instructions regarding building codes and local authority requirements for installation.
Crucial safety instructions for installation and operation to prevent damage or injury.
Details on minimum distances from combustible materials for safe installation.
Specifications for non-combustible floor coverings to prevent heat damage.
Specific guidelines and requirements for installing the stove in mobile homes.
A list identifying each numbered part shown in the stove diagram.
Physical measurements of the stove, including height, width, and depth.
Stove performance data: BTU output, heating efficiency, and electrical requirements.
Details on the stove's certification for particulate emission standards.
Information regarding the ceramic glass used in the stove's door.
Essential safety guidelines specifically for installations in mobile homes.
Key advice for safe operation, maintenance, and handling of the stove.
Requirements and characteristics for approved wood pellets for optimal performance.
Recommendations for storing wood pellets to maintain quality and prevent hazards.
Definitions of combustible and non-combustible materials used in installation contexts.
Guidance on selecting an appropriate place for the stove, considering safety and heat distribution.
Factors affecting stove draft and important considerations for chimney installation.
Specific warnings related to stove location, venting, and potential hazards.
Tips for maintaining the burn pot and proper disposal of ashes.
Information on combustion byproducts and methods for their management.
Recommendations for installing smoke detectors on each level of the home.
List of necessary tools and materials for the installation process.
Critical safety guidelines and warranty considerations for stove installation.
Specific instructions and clearance requirements for installing the exhaust vent.
Required distances from combustible materials for safe and compliant installation.
Specifications for non-combustible floor coverings to prevent heat damage.
Additional requirements and considerations for mobile home installations.
Detailed measurements for safe and compliant placement of vent terminations.
Importance of adhering to local building codes and regulations for venting.
Understanding and calculating vent system resistance for optimal performance.
Guidelines for selecting and installing pipes, elbows, and fittings for venting.
Details on installing the vent termination close to the exterior wall.
Details on installing the vent termination farther from the exterior wall.
Instructions for installing the vent system into an existing chimney.
Instructions for installing the vent system into an existing fireplace chimney.
Using a stainless steel liner within an existing chimney for venting.
Alternative method for installing a full liner in an existing chimney.
Instructions for venting the stove through the ceiling.
Recommended setup and clearances for venting through an exterior wall.
Managing house pressure and stove operation during power outages.
Importance of outside air supply and proper vent pipe installation for draft.
Recommended vent setups to prevent back-drafting and ensure proper airflow.
Reasons for connecting outside air for combustion to improve performance and safety.
Optimal placement for the air intake based on side-wall or roof venting type.
Standards and procedures for compliant installation of the stove in mobile homes.
Specific warnings and essential safety measures for mobile home use.
Essential practices and precautions to prevent fires during stove operation.
Step-by-step instructions for handling a fire incident in the pellet hopper.
Importance of checking stove components for damage before and during use.
Description of buttons and their uses on the stove's main control panel.
Explanation of the functions and buttons on the remote control unit.
Steps for starting the stove and the automatic ignition sequence.
Procedure for safely shutting down the stove and its operating cycles.
Actions to take if the stove fails to ignite during the startup process.
Instructions on how to navigate the stove's menu system for settings adjustment.
Adjusting language, time, weekly timers, and operating modes on the stove.
Running diagnostic tests on stove components to ensure proper functionality.
Explanation of Manual Temperature (MT), Automatic (AT), TC, and Economy (ECO) modes.
Accessing and understanding information displayed on the stove's control screen.
Accessing factory reset, general technical, and dealer technical settings.
Instructions for connecting the stove to a wireless network for smart control.
Adjusting the desired room temperature for climate control.
Setting the flame intensity and heat output of the stove.
Adjusting the fan speed for optimal air circulation and heat distribution.
Information on the 24V battery backup system for power outage operation.
Instructions for customizing the stove's appearance with interchangeable panels.
Step-by-step guide to physically connect the WiFi antenna to the stove.
Steps to download the app and create a user account for stove control.
Process for verifying the stove's identity with the smart phone application.
Steps to access and configure WiFi settings directly on the stove's control panel.
Final steps to link the smart phone app to the stove via the WiFi network.
Explanation of the Home, Flame, Temperature, and Fan control screens in the app.
Guidelines on using approved pellets and maintaining the burn pot for efficiency.
List of materials that should not be burned in the stove to prevent damage or hazards.
Essential checks to perform before lighting the stove for safe operation.
Step-by-step instructions for safely lighting the stove and initiating operation.
Information regarding paint curing and potential effects during first fires.
Procedures for door use and actions when the stove runs out of pellets.
Instructions for safely refueling the stove and performing a shutdown procedure.
Information on safety features and fault conditions that may occur during shutdown.
Recommended intervals for cleaning, inspecting, and servicing stove components.
Methods for dealing with combustion byproducts like creosote and fly ash.
Specific instructions for inspecting vent systems and cleaning components.
Detailed steps for cleaning the burn pot, deflector, and housing.
Procedure for safely removing and cleaning the ash pan.
Cleaning procedures for flue tubes, exhaust motor, and fan blades.
Instructions for cleaning the heat exchanger tubes using the provided scraper.
Methods for cleaning the stove's glass door using ash and other materials.
Procedures for inspecting door seals and replacing worn or damaged gaskets.
Instructions for cleaning the smoke pipes and vent termination.
Cleaning the hopper and inspecting its lid gasket for damage.
Information on identifying and replacing power and igniter fuses.
Key safety advice to ensure proper and safe operation of the stove.
Important cautions regarding venting, mobile homes, fuel, and operation.
Troubleshooting common maintenance alerts and ignition failure alarms.
Addressing high flue gas, hopper temperature, and low pressure alarms.
Troubleshooting hopper status and temperature sensor related fault codes.
Diagnosing and resolving problems with weak flames and fire extinction.
Addressing issues with pellet feeding and the stove stopping unexpectedly.
Solutions for stove failure to start and identifying abnormal operating noises.
A visual representation of all stove parts with corresponding numbers.
A catalog of all available replacement parts with their corresponding part numbers.
Diagram illustrating the stove's internal wiring and component connections.
Terms and duration of the limited one-year warranty for the stove.
Requirements for warranty validity and list of non-covered items.
Circumstances under which the product's warranty becomes null and void.
How to obtain warranty service or replacement parts from the manufacturer.
