To Next PageTo Next Page
Need help?Do you have a question about the Freedom Harris XL-200 and is the answer not in the manual?
General| Brand | Freedom |
|---|---|
| Model | Harris XL-200 |
| Category | Measuring Instruments |
| Language | English |
Defines "parts per million" for frequency measurements.
Specifies required firmware versions for AutoTune and RSSI alignment.
Emphasizes using conventional channels to avoid initialization failures.
Lists Harris XL-200 series models supported by AutoTune.
Details the physical connections and diagram for the test setup.
Checks the lock range of the synthesizer circuits by testing Rx and Tx frequencies.
Details the alignment and testing procedures for TCXO frequency.
Covers the alignment and testing of Received Signal Strength Indicator (RSSI).
Explains the test procedure for measuring radio transmitter power output.
Measures deviation levels and tone/code accuracy for CTCSS/CDCSS modulation.
Assesses modulation fidelity and symbol deviation for P25 Phase 1 C4FM transmission.
Measures P25 Phase 1 C4FM deviation level at specific frequencies for High and Low patterns.
Measures P25 Phase 1 C4FM sensitivity at various Rx test frequencies using BER.
Measures P25 Phase 2 TDMA sensitivity at various Rx test frequencies using BER.
Provides contact details for technical assistance and support.
Provides contact details for sales inquiries and information.
