To Next PageTo Next Page
Need help?Do you have a question about the Freeflow Spas Azure and is the answer not in the manual?
Ensures safe placement near power lines and meets local codes.
Determines placement based on recreational or therapeutic use.
Addresses climate, ventilation, moisture, and drainage.
Considers surroundings and desired visual aspects.
Recommends concrete paths to prevent dirt tracking.
Ensures access for maintenance by allowing space for panel removal.
Ensures the foundation supports tub weight and prevents shifting.
Addresses water drainage and flooring suitability for indoor setups.
Strongly recommends a qualified contractor for foundation preparation.
Compare tub size to gates and doorways for delivery route.
Check path for width, turns, and overhead obstructions.
Details on using a wire connector for electrical safety.
Emphasizes child supervision and preventing unauthorized access.
Instructions on suction fittings and flow rate compatibility.
Guidelines for spa placement relative to metal surfaces and electronics.
Maximum recommended temperatures for adults and pregnant women.
Advises consulting a physician for certain health conditions and medication use.
Symptoms and immediate actions for heat stroke.
Importance of having emergency numbers readily available.
Mandates reading, keeping, and making safety instructions available.
Stresses constant supervision and preventing unauthorized child access.
Guidelines for suction fittings to prevent entrapment and injury.
Warnings about electrical appliances near the spa and installation distances.
Details on safe water temperatures, health conditions, and medication effects.
Explains hyperthermia, its symptoms, and dangers like drowning.
Details on proper outlet installation, amperage, and grounding.
Warns against sharing outlets or using extension cords.
Specifies authorized personnel for GFI cord replacement.
Advises against servicing electronic components and recommends professional help.
How the spa heats automatically and adjusts temperature settings.
Operation of jets, pump, ozone generator, and spa light.
How to disable spa functions for filter replacement.
Details on automatic filtration cycles and freeze protection mechanisms.
Explanation of display messages like OH, Sn, and Sb.
Regulates air mixed with water for jet pressure.
How to turn jets on/off and adjust their effects.
Explains the ozonator's role in water purification and its limitations.
Instructions for using aroma therapy crystals.
Guidance on sanitizers, filters, and water quality management.
Step-by-step guide on filling the hot tub, including water level and leak checks.
Procedures for connecting power and initial system checks.
Emphasizes the critical role of maintaining proper water chemistry.
Guidance on how often to change the hot tub water.
Warning against storing chemicals inside the spa's equipment bay.
Details on ideal pH levels and consequences of imbalance.
Information on using sanitizers to remove bacteria and maintain water clarity.
Discourages use of Hydrogen Peroxide due to potential damage.
Instructs to unplug the spa before draining to prevent damage.
Step-by-step process for draining the hot tub water.
Guidance on winterizing to prevent freezing damage, including wet-vac use.
How to clean, replace, and care for the filter cartridge.
Detailed steps for removing, rinsing, and deep cleaning the filter.
Recommendations for cleaning the hot tub exterior without damage.
Instructions for cleaning and maintaining the spa cover.
How to install colored lenses for the spa light.
Steps for safely replacing the spa light bulb.
Explains why the spa might run continuously and normal operation.
Discusses heating speed and requirements for heating to occur.
Troubleshooting steps for when the spa is completely unresponsive.
Diagnosing issues when the pump doesn't run but the light does.
Troubleshooting water leaks or condensation around the spa.
Steps to improve weak or inconsistent jet performance.
Addressing issues with overheating and the OH error message.
Details warranty coverage for shell manufacturing defects.
Covers electrical, mechanical, and plumbing components for one year.
Procedure for making a warranty claim and service responsibilities.
Lists actions or conditions that void the warranty.
Limitations on Freeflow Products, Inc.'s liability.
Information on consumer rights that may vary by state.
General| Brand | Freeflow Spas |
|---|---|
| Model | Azure |
| Category | Hot Tub |
| Language | English |
