Freeman PFN1564 User Manual

Wear eye/hearing protection, dress properly, stay alert, maintain footing.

Tool recoils after driving. Do not prevent recoil. Grip handle firmly.

Do not actuate tool unless driving fastener. Never pull trigger unless nose directed at work.

Connector must not hold pressure when air supply disconnected. Avoid injury from ejected fastener.

Do not use oxygen or bottled gases. Do not exceed 200psi compressor output.

Disconnect air before adjustments, servicing, cleaning jams, or when tool is not in use.

Do not load with controls activated. Never place body parts in discharge area. Never point tool at anyone.

Do not pull trigger or depress contact when loading. This may cause accidental actuation.

Connect air, pull pusher back, insert fasteners, release pusher to move fasteners.

Disconnect air, remove fasteners, open jam release, clear jam with tool, close release.

Tool may fire when first connected. Connect before loading. Ensure magazine is empty.

Use only recommended fasteners. Other fasteners could result in tool malfunction or serious injury.

Keep tool pointed away from yourself and others when loading fasteners.

Never load fasteners with workpiece contact or trigger activated.

Select single or sequential actuation. Grip firmly, position nose, depress contact, squeeze trigger.

Disconnect air, empty magazine before inspection, maintenance, or cleaning.

Do not let brake fluids, gasoline, or petroleum products contact plastic parts.

Use only Freeman Authorized Repair Parts. Contact for questions or visit website.