• To avoid damage or malfunction DO NOT use abrasives, brushes,
UV or steam sterilization on any Freemie Cup parts.
• Assemble dry parts just before use, and leave parts disassembled in between use.
Clean Your Parts
2
1: Place Valve
onto Valve Base.
2: Insert Barrier into Valve Base.
Put Cups Together
3
Incorrect assembly may cause
poor suction or malfunction.
3: Press assembled Valve Base
onto Flange...
Prior to First Use: Boil these parts
in large uncovered pots for
10 minutes while stirring.
After Each Use: Clean these parts with hot
soapy water and rinse well.
These parts do not come into contact
with milk and need not be cleaned
in between use.
Note: See digital User Manual for
complete use and care instructions.
... and press together firmly.
Snap
4: Align Cup Tab with Flange Tubing Port and press together until you hear
the Cup “snap” closed.
Tubing Port (round hole)
Cup Tab
Note: Barrier flaps must overlap Valve Base edges.
To Next Page
Loading...
