IMPORTANT:
charge belle+
™
on
cradle before rst use
Charging Procedures:
Plug in the charging cradle and
place belle+ into the cradle.
• belle+ is in the process of charging when the small,
red battery light on the device is ashing.
• belle+ is fully charged when the small, red battery
light on the device is solid. Typical charging time is
2-3 hours.
• Remember, it is normal for the red battery light on
belle+ to be off when the device is not in the
charging cradle, and for the blue WiFi and GPS
lights to be off. The blue call light will ash slowly
when belle+ is on and ready for use.
WARNING: belle+’s rechargeable battery lasts up
to 5 days per charge. Only charge as needed.
Do not leave belle+ on cradle for more than 10
hours at a time.
To Next Page
Loading...