Please read all instructions carefully before assembly and flight!
Thank you for purchasing the F9F Panther. This model is designed for the intermediate to
advanced flyer. The model is receiver-ready and includes everything that you need to assemble
and fly your F9F Panther, except for the radio transmitter and receiver. Please read the following
instructions carefully, assembly is easy and should only take an hour or so.
Main Specifications
Wingspan: 27” (685mm)
Fuselage length: 28-3/4” (730mm)
Flight weight: 19-1/2 oz. (552g)
64mm EDF
4300KV out-runner brushless motor.
3-cell 11.1V 1600mAh 20C lipo battery
30A ESC
3pcs. 9g Servo
Optional Landing Gear (Sold Separately) w/ steerable nose wheel and servo included
Radio System with minimum 3-channel Transmitter and Receiver
Battery charger capable of charging a 3-cell Lipo battery
Safety Statement
1. This is not a toy. It is for experienced modelers only. You are responsible for the safe
operation of this model and any damage or harm it may cause.
2. Before flying the F9F Panther for the first time please read through the instructions carefully
and make sure that your radio equipment is working properly and has been range tested
prior to flight.
3. Young people under the age of 14 should only be permitted to operate this model under the
instruction and supervision of an adult with modeling experience.
4. Please keep these instructions for future reference after completing model assembly. They
contain information critical to the safe operation of this model.
5. If you have any further questions regarding the safe operation of your RC model, please
contact your local hobby shop, flying club or Freewing Model Company
for professional
he
lp and advice.
F9F Panther
Item No.:F1701 -1-
All of the above parameters only for the RTF with landing gear, if you purchase another version, you
could refer to the above and choose another spareparts.
To Next Page
Loading...
