Procedure
Performed
(check off or
initial)
6000 Mile (9654 km) or 6 Month Initial Maintenance
*
MOP
Inspect _____ Engine Drive Belt Inspecting 01–01
Check _____ Engine-Support Fasteners Checking 01–02
Change _____
Engine Oil and Filter (see the engine manufacturer’s
manual)
—
Inspect _____
Charge Air Cooler (CAC) Inspection and Cleaning (if
cleaning is needed)
09–02
Check _____ Alternator, Battery, and Starter Connections Check 15–01
Inspect/
Check
_____
Radiator (radiator cap, coolant freeze points, hose routing
for chaffing and leaks)
20–01,
20–02,
20–03
Change _____ Mechanical Fan Drive Gearbox Oil Change 20–04
Change _____ Transmission Fluid and Filter (if required by Allison) 26–03
Inspect _____ Transmission Hose Routing for Chaffing and Leaks —
Lubricate _____ Throttle Pedal Pivot Pin Lubricating 30–01
Check _____ Suspension Fastener Torque Check 32–01
Check _____ Suspension Height Control Valve Check 32–02
Lubricate _____ ZF IFS Lubrication 32–04
Check _____ Suspension U-Bolt Torque Check 32–06
Inspection_____ V-Ride Rear Suspension Inspection 32–07
Lubricate _____ Knuckle Pin Lubricating
†
33–01
Lubricate _____ Tie-Rod End Lubricating and Inspecting
†
33–02
Check _____ All-Axle Alignment Checking 33–03
Inspect _____ Wheel End Inspecting 33–04
Check/
Change
_____ Oil-Filled Hubs Oil Changing (front and tag axle)
33–05,
33–06,
35–04,
35–05
Check _____ Axle Seals for Leaks —
Change _____
Axle Lubricant Changing and Magnetic Plug Cleaning
(Detroit and Meritor axles)
35–02
Check _____ Axle Breather Checking 35–03
Check _____ Wheel Nut Checking 40–01
Check _____ Tire Pressure —
Lubricate _____ Driveline Inspection and Lubrication 41–01
Inspect _____ Brake System Valves Inspecting 42–01
Inspect _____
Air Dryer and Air Lines for Proper Routing, Chaffing, and
Leaks
42–02
Lubricate _____ Camshaft Bracket Bushing Lubricating 42–04
General Information00
6000 Mile or 6 Month Initial Maintenance: 00–03
Recreational Vehicle Chassis Maintenance Manual, April 201800/6
To Next Page
Loading...
