●Option 3: Pump draining (Pump models only)
Internal Pump Mode- The internal pump allows the unit to operate without having to empty
the bucket. To install the Pump Drain Hose Kit, remove the drain cap on the back of the unit.
Insert the included gasket into the Drain Adapter, then force the Drain Hose onto the Drain
Adapter and turn clockwise onto the garden hose nozzle on the back of the unit as pictured
below. (Drain adapter is included in storage compartment on top of water bucket) Once
securely installed, lead the Drain Hose to a nearby drain, sink or out of a window up to 16ft
height from the base of the unit. Turn on the unit and press the pump button to activate the
internal pump.
CAUT
ION: PUMP MODE WILL ONLY OPERATE WITH A FREONIC DRAIN HOSE AND DRAIN ADAPTER;
DO NOT USE A GARDEN HOSE IN PUMP MODE OR ANY OTHER TUBING.
To Next Page