7
eng
• Stay near and watch child during use.
• Keep the high chair away from open fire,
heaters and other sources of strong heat,
such as electric bar fires, gas fires etc. in the
vicinity of the high chair.
• Do not use the high chair unless all
components are correctly fitted and
adjusted.
• Falling hazard: Prevent your child from
climbing on the product.
• Be aware of the risk of tilting when your
child can push its feet against a table or any
other structure.
• Always use the restraint system.
• Make sure harness is correctly fitted before
use.
• Only use the high chair on a flat, even and
horizontal floor and not to elevate the high
chair on any structure or table.
• Always be sure your child is clear of the
high chair’s moving parts before making
adjustments.
• Check the high chair regularly for damage
and to ensure that the harness is secure
and performs correctly. No lubrication is
necessary.
• IMPORTANT: Every time you place your
child in the high chair or whenever you alter
the position of the seat, always check that
the harness is correctly fitted. Tighten the
harness until it fits snugly around your child.
• MOST INJURIES FROM HIGH CHAIRS ARE
CAUSED BY FALLS.
• POSITION THE HIGH CHAIR AWAY FROM
SOLID STRUCTURES AND BENCHES TO AVOID
INJURIES CAUSED BY FALLS AND BY ACCESS
TO DANGEROUS ITEMS.
• Keep the high chair away from furniture,
walls, hot surfaces and liquids, window
covering cords, and electrical cords and
position the high chair away from furniture
when the chair is not being used at a table
with a tray removed.
• In compliance of ASTM F404 for the US
market and AS 4684 for the Australia
market, the comfort nest shall be installed
on the seat unit for high chair use with
children between 6 months and 3 years.
• In high chair mode the seat unit shall always
be adjusted to the vertical upright position.
Footrest Assembly and Footrest Adjustment
IMPORTANT!
• DO NOT use footrest as a step.
• Suitable for use up to 24 months.
– (#07 footrest) Slide in footrest until you hear
an audible click. Check footrest is secured by
pulling it downwards.
– To remove footrest, press button located on
the end of the footrest attached to the seat
unit, whilst sliding the footrest out of seat unit.
– The footrest has three height positions. Press
the button on the back of the footrest, whilst
sliding footrest up or down to your desired
position. The footrest is locked into position
when you hear an audible click. Check footrest
is secured by pulling it downwards. (refer to
illustration c1)
To Next Page
Loading...