What to do if I get an occlusion alarm on my Fresenius Kabi Water Pump?
If you receive an occlusion alarm, it means the pressure in the infusion line has reached the threshold. You should check the infusion line for any obstructions. If necessary, readjust the pressure threshold.
What should I do if my Fresenius Kabi Water Pump shows a very low battery?
If the pump indicates a very low battery, immediately connect it to a power supply and allow sufficient time for charging.
What to do if my Fresenius Kabi Water Pump shows a battery alarm?
If the Water Pump displays a battery alarm, connect it to a power supply immediately.
What does it mean when my Fresenius Kabi Water Pump shows 'Occlusion pre-alarm !!'?
An occlusion pre-alarm indicates that the in-line pressure is approaching the programmed threshold. You should check the infusion line for any potential obstructions and set the correct pressure threshold.
What to do if there is a power disconnection on Fresenius Kabi Water Pump?
If there is a power disconnection, acknowledge the alarm. Ensure the battery has sufficient life for the remaining infusion time. If the disconnection was not intentional, check the power connection.
Why does my Fresenius Kabi Agilia SP TIVA Water Pump say 'Check settings !!'?
The 'Check settings !!' message appears when the flow rate or dose has been modified but not confirmed. Review the flow rate or dose and press OK to confirm the changes.
What does it mean when my Fresenius Kabi Agilia SP TIVA Water Pump displays 'Syringe installation !!!'?
This message indicates that the syringe is not correctly installed, which could involve the plunger driver, syringe barrel clasp, or flange detection. Check the syringe installation to ensure it is properly placed.
What to do if my Fresenius Kabi Agilia SP TIVA Water Pump shows 'Battery pre-alarm !!'?
If the Water Pump displays a battery pre-alarm, connect it to a power supply.
Why does my Fresenius Kabi Agilia SP TIVA Water Pump show 'Plunger head alarm !!!'?
The 'Plunger head alarm !!!' indicates that the plunger head is either missing or incorrectly inserted. You should check the syringe installation.
What to do if my Fresenius Kabi Agilia SP TIVA displays 'Waiting start !!'?
The 'Waiting start !!' message means the infusion settings have been entered but not confirmed with the start button. Review the infusion settings, and then press start to begin the infusion.
General| Brand | Fresenius Kabi |
|---|---|
| Model | Agilia SP TIVA |
| Category | Water Pump |
| Language | English |
Specifies the purpose and target users of the Agilia SP TIVA Syringe Pump.
Lists conditions and situations where the pump should not be used.
Explains the pump's keypad functions and display elements for user interaction.
Covers accessing and modifying pump menus for various settings.
Guides pump installation, pole clamp usage, and attachment methods.
Guides users through initial pump setup, charging, and syringe installation.
Details selecting profiles, modes, drugs, and programming infusion parameters.
Guides on starting infusions, monitoring progress, and managing end-of-infusion events.
Details pump alarms, their priorities, and essential safety features.
Offers solutions for common issues encountered with the pump.
To Next Page
