Freud 222 - Six Piece Slot Cutter Sets; Item Number 89-300 Set; Item Number 89-350 Set; Six Piece Straight Bit Set

234
ROUTER BITS & SETS
Router Bit Sets
Six Piece Slot Cutter Sets
• Includes four three-wing slot cutters (1/16", 1/8", 5/32", and 1/4"
kerf), a ball bearing (62-108) to provide a 9/16" depth of cut, an
arbor and an attractive wooden storage box.
• Slotting cutters produce precision slots for T-molding, spline joints,
and many other applications.
• Cuts all composition materials, plywoods, hardwoods, and
softwoods.
• 56-109 can be used for biscuit joining.
Application: Produce precision slots for T molding,
spline joints, and several other applications
Six Piece Straight Bit Set
• Sizes range from 1/4" diameter to 1" diameter in 1/8" increments.
• All bits have 1/2" shanks.
• Includes attractive wooden storage box.
• Cuts all composition materials, plywoods, hardwoods, and
softwoods.
• Use on hand-held and table-mounted portable routers.
Application: Allows you to make grooves, dadoes,
and rabbets
Red Item Numbers Indicate 1/2" ShankSee individual bit for scale profile
# 89-300
# 91-102
Bit Type Item Overall Bore Carbide Shank
Number Dia. Dia. Height Dia.
Item Number 89-300
Three Wing Slot Cutter 56-100 2" 5/16" 1/16" –
Three Wing Slot Cutter 56-108 2" 5/16" 1/8" –
Three Wing Slot Cutter 56-109 2" 5/16" 5/32" –
Three Wing Slot Cutter 56-112 2" 5/16" 1/4" –
Ball Bearing 62-108 22mm (7/8") 8mm (5/16") – –
1⁄4" Arbor 60-100 – – – 1/4"
Item Number 89-350
Three Wing Slot Cutter 56-100 2" 5/16" 1/16" –
Three Wing Slot Cutter 56-108 2" 5/16" 1/8" –
Three Wing Slot Cutter 56-109 2" 5/16" 5/32" –
Three Wing Slot Cutter 56-112 2" 5/16" 1/4" –
Ball Bearing 62-108 22mm(7/8") 8mm(5/16") – –
1⁄2" Arbor 60-102 – – – 1/2"
Slot Cutter's Profile
New
Shadow
Box
Bit Type Item Overall Carbide Shank Overall
Number Dia. Height Dia. Length
Item Number 91-102
Double Flute Straight Bit 12-100 1/4" 3/4" 1/2" 2-3/8"
Double Flute Straight Bit 12-106 5/16" 1" 1/2" 2-3/4"
Double Flute Straight Bit 12-116 1/2" 1" 1/2" 2-5/8"
Double Flute Straight Bit 12-136 5/8" 1" 1/2" 2-1/2"
Double Flute Straight Bit 12-152 3/4" 1" 1/2" 2-1/2"
Double Flute Straight Bit 12-172 1" 1-1/4" 1/2" 3"
Double Flute
Straight Bit Profile
222-239 pages 8-31-06 8/31/06 1:01 PM Page 234