Freud 222 User Manual

222
ROUTER BITS & SETS
Router Bit Sets
Five Piece Introductory Bit Set
• This four-piece set transforms to five pieces by using a bearing to convert
the beading bit into a rounding over bit.
• Includes a flush trim, straight, Roman ogee and beading bit.
• All bits have 1/4" shanks.
• Includes attractive wooden storage box and extra bearing.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Application: Fundamental bit set for novice woodworkers
Five Piece Introductory Bit Set
• Freud’s new Five Piece Introductory Set provides an economical yet very
useful introduction to the wide world of possibilities offered by your 1⁄2"
collet router.
• Includes a flush trim, straight, Roman ogee, and rounding over bit.
• All bits have 1⁄2" shanks.
• Set comes in Freud’s unique shadow box case, this set hangs on the wall
or mounts on the bench to keep bits handy and safe.
• Cuts all composition materials, plywoods, hardwoods, and softwoods.
• Use on hand-held and table-mounted portable routers.
Application: Fundamental bit set for novice woodworkers
Red Item Numbers Indicate 1/2" ShankSee individual bit for scale profile
# 91-103
# 42-104
# 04-108
# 36-114# 38-100
# 88-104
Bit Type Item Overall Bearing Carbide Number Large Shank Overall
Number Dia. Dia. Height of Flutes Radius Dia. Length
Item Number 88-104
Bearing Flush Trim Bit 42-104 1/2" 1/2" 1" 2 – 1/4" 2-13/16"
Double Flute Straight Bit 04-108 1/4" – 1" 2 – 1/4" 2-1/2"
Roman Ogee Bit 38-100 1-1/16" 3/8" 1/2" – 5/32" 1/4" 2-3/16"
Beading Bit 36-114 1-1/4" 3/8" 5/8" – 3/8" 1/4" 2-3/16"
Rounding Over Bit* 34-114 1-1/4" 3/8" 5/8" – 3/8" 1/4" 2-3/16"
* Use included bearing #62-104 to convert 36-114 Beading Bit into 34-114 Rounding Over Bit.
Bit Type Item Overall Bearing Carbide Number Large Shank Overall
Number Dia. Dia. Height of Flutes Radius Dia. Length
Item Number 91-103
Bearing Flush Trim Bit 42-110 1/2" 1/2" 1" 2 – 1⁄2" 3-1/4"
Double Flute Straight Bit 12-100 1/4" – 3/4" 2 – 1⁄2" 2-3/8"
Roman Ogee Bit 38-104 1-1/16" 3/8" 1/2" – 5/32" 1⁄2" 2-3/8"
Rounding Over Bit 34-124 1-1/4" 1/2" 5/8" – 3/8" 1⁄2" 2-5/8"
*Beading Bit 36-124 1-1/4" 3/8" 5/8" – 3/8" 1⁄2" 2-5/8"
* Use included bearing #62-104 to convert 34-124 Beading Bit into 36-124 Rounding Over Bit.
New
Shadow
Box
# 34-114*
# 42-110
# 12-100
# 36-124*# 38-104
# 34-124
Video-CD
Included
R
o
u
t
i
n
g
T
i
p
s
&
T
e
c
h
n
i
q
u
e
s
Video-CD
Included
R
o
u
t
i
n
g
T
i
p
s
&
T
e
c
h
n
i
q
u
e
s
NEW
New
Shadow
Box
222-239 pages 8-31-06 8/31/06 12:58 PM Page 222

Freud 222 Specifications

General

Brand	Freud
Model	222
Category	Wood Router
Language	English

Summary

Five Piece Introductory Bit Set (1/4" Shank)

Bearing Flush Trim Bit

1/4" shank flush trim bit for novice woodworking sets.

Double Flute Straight Bit

1/4" shank straight bit for novice woodworking sets.

Roman Ogee Bit

1/4" shank Roman ogee bit for novice woodworking sets.

Beading Bit

1/4" shank beading bit for novice woodworking sets.

Rounding Over Bit

1/4" shank rounding over bit for novice woodworking sets.

Five Piece Introductory Bit Set (1/2" Shank)

Bearing Flush Trim Bit

1/2" shank flush trim bit for novice woodworking sets.

Double Flute Straight Bit

1/2" shank straight bit for novice woodworking sets.

Roman Ogee Bit

1/2" shank Roman ogee bit for novice woodworking sets.

Rounding Over Bit

1/2" shank rounding over bit for novice woodworking sets.

Beading Bit

1/2" shank beading bit for novice woodworking sets.

Nine Piece Basic Bit Set

1/4" Shank Set Components

Components of the 9-piece basic bit set with 1/4" shanks.

1/2" Shank Set Components

Components of the 9-piece basic bit set with 1/2" shanks.

Five Piece Up Spiral Bit Set

Up Spiral Bit (Various Sizes)

Individual up spiral bits included in the 5-piece set.

5 Piece Down Spiral Bit Set

Down Spiral Bit (Various Sizes)

Individual down spiral bits included in the 5-piece set.

Four Piece Undersized Plywood Bit Set

1/4" Shank Set Components

Components of the 4-piece undersized plywood bit set with 1/4" shanks.

1/2" Shank Set Components

Components of the 4-piece undersized plywood bit set with 1/2" shanks.

Six Piece Starter Bit Set

Bit Types in Set

Includes round nose, cove, rabbeting, rounding over, Roman ogee, and chamfer bits.

15 Piece Advanced Bit Set

Bit Types in Set

Comprehensive set with various profiles for advanced woodworking.

26 Piece Artisan Bit Set

Bit Types in Set

Extensive set for professionals, covering many woodworking profiles.

13 Piece Super Bit Set

Bit Types in Set

Mix of popular bits including grooving, trim, chamfer, and dovetail.

Three Piece Vertical Raised Panel Sets

Item Number 97-504 Set

Includes rail & stile and vertical raised panel bits.

Item Number 97-604 Set

Includes rail & stile and vertical raised panel bits.

Three Piece Cabinet Bit Set

Item Number 97-100 Set

Includes rail & stile and 2+2 raised panel bits.

Cabinet Sets with Backcutters

Sets with backcutter options for rail/stile and 2+2 raised panel bits.

Five Piece Cabinet Bit Set

Bit Types in Set

Set for cabinet doors, includes door lip, raised panel, and rail/stile bits.

Five Piece Cabinet & Molding Bit Set

Bit Types in Set

Set for cabinet doors and molding patterns, includes glue joint and raised panel bits.

New Architectural Molding Set

Bit Types for Molding

Six bits for crown, casing, chair rail, and base molding profiles.

Three Piece Door Construction Set

Bit Types for Door Construction

Bits for 1-3/4" exterior or 1-3/8" interior doors, includes roundover and raised panel.

Advanced Cabinet Door Set

Bit Types for Cabinet Doors

Set for cabinet doors and drawers, includes drawer lock bit.

Nine Piece Table Making Set

Bit Types for Table Making

Includes bits for fluting, flush trimming, chamfering, and table edges.

Eight Piece Bit Sets for Incra Jig®

Bit Types for Incra Jig®

Sets for creating dovetail and box joints with Incra Jig®.

Three Piece Cove Bit Sets

Item Number 89-500 Set

Includes 1/4", 3/8", and 1/2" radius cove bits.

Item Number 89-550 Set

Includes 1/4", 3/8", and 1/2" radius cove bits.

Three Piece Round Over/Beading Bit Sets

Item Number 89-100 Set

Three rounding over bits convertible to beading bits.

Item Number 89-150 Set

Three rounding over bits convertible to beading bits.

Five Piece Round Over/Beading Bit Sets

Item Number 89-102 Set

Five rounding over bits convertible to beading bits.

Item Number 89-152 Set

Five rounding over bits convertible to beading bits.

Six Piece Slot Cutter Sets

Item Number 89-300 Set

Includes slot cutters for T-molding, spline joints, and biscuit joining.

Item Number 89-350 Set

Includes slot cutters for T-molding, spline joints, and biscuit joining.

Six Piece Straight Bit Set

Bit Types in Set

Set includes straight bits for grooves, dadoes, and rabbets.

Three Piece Chamfer Bit Set

Bit Types in Set

Includes 22-1/2°, 30°, and 45° chamfer bits.

Four Piece Chamfer Bit Set

Bit Types in Set

Includes 15°, 25°, 30°, and 45° chamfer bits.