EasyManua.ls Logo

Frick XLP3 User Manual

Frick XLP3
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Form 140.925-IOM (APR 2019)
INSTALLATION - OPERATION - MAINTENANCE
File: SERVICE MANUAL - Section 140
Replaces: Nothing
Dist: 3, 3a, 3b, 3c
XLP3 Evaporative Condenser
THIS MANUAL CONTAINS RIGGING, ASSEMBLY, START-UP,
AND MAINTENANCE INSTRUCTIONS. READ THOROUGHLY
BEFORE BEGINNING INSTALLATION. FAILURE TO FOLLOW THESE
INSTRUCTIONS MAY RESULT IN PERSONAL INJURY OR DEATH,
DAMAGE TO THE UNIT, OR IMPROPER OPERATION.
Please check www.johnsoncontrols.com/frick for the latest version of this publication.

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Frick XLP3 and is the answer not in the manual?

Frick XLP3 Specifications

General IconGeneral
ApplicationResidential/Commercial
Cooling Capacity36, 000 BTU/h
Phase1
RefrigerantR410A
Voltage208/230V

Summary

INSTALLATION

SAFETY PRECAUTIONS (INSTALLATION)

Critical safety measures to follow during installation.

RIGGING AND ASSEMBLY

Procedures for rigging and assembling unit sections.

OPERATION

GENERAL SAFETY PRECAUTIONS (OPERATION)

Important safety guidelines for operating the unit.

START-UP PROCEDURE

Detailed steps for initial unit start-up.

EXTENDED SHUTDOWN AND STORAGE

COLD WEATHER OPERATION

Methods and procedures for operating in subfreezing temperatures.

FREEZE PROTECTION

Protecting basin water, piping, and coils from freezing.

VIBRATION CUTOUT SWITCH (VCOS)

FAN CONTROL

MAINTENANCE

DETAILED COMPONENT MAINTENANCE PROCEDURES

Maintenance procedures for specific unit components.

COLD WATER BASIN MAINTENANCE

BELT DRIVE FAN SYSTEM MAINTENANCE

WATER DISTRIBUTION SYSTEM AND HEAT TRANSFER SECTION MAINTENANCE

CORROSION PROTECTION

Protecting unit materials from corrosion.

WATER TREATMENT AND CHEMICAL REQUIREMENTS

PASSIVATION AND BIOLOGICAL CONTROL

RECOMMENDED MAINTENANCE INTERVALS