Do you have a question about the Frico Thermozone AD210E06 and is the answer not in the manual?
Carefully read this instruction manual before installation and use of the AD unit. Keep these instructions in a safe place for future reference.
The Thermozone AD200 air curtains are intended for stationary/permanent installation above entrances and smaller doors with a height up to 2.5 meters.
The air is drawn in at the top of the unit and blown out at high velocity across the doorway, providing a protective air shield.
The units may only be installed horizontally over a doorway with the air-stream directed downwards. For the protection of wider doorways, several units can be mounted next to each other.
The air-curtain(s) should only be wired by a competent electrician, and in accordance with the latest edition of IEE wiring regulations.
Ensure the area around the intake and exhaust grille is kept free from material which could prevent the air to flow through the unit. Surfaces are hot during operation.
Guidance for issues like fans not standing still or no heat, including checks for power supply and thermostat settings.
Details on the overheat protector, how to reset it, and the procedure to follow if it is released due to overheating.
Includes instructions for maintenance, safety cut-out for heating elements, and general warranty conditions.
Detailed specifications for various Thermozone AD models including output, voltage, current, airflow, noise level, weight, and protection class.
Description of control panels like CB30N, CB32N for manual regulation of fan speed and output.
Information on ADEA air curtain regulator, external control board ADEAEB, and door contacts like MDC.
Details on electronic 2-step thermostat RTI2 and capillary tube thermostat KRT2800 for temperature control.
Includes false ceiling grilles (22003, 22004), pendulum brackets (ADPF1), and suspension set (ADPK1).
Manufacturer declares that products comply with EC directives, including Low Voltage and Electromagnetic Compatibility directives.
Lists harmonised standards used for compliance, such as SS-EN 60 335 series and SS-EN 50 082-1.








