Need help?Do you have a question about the Friedman BE-100 and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Power | 100 Watts |
| Preamp Tubes | 4 x 12AX7 |
| Power Tubes | 4 x EL34 |
| Master Volume | Yes |
| EQ | 3-Band |
| Inputs | 1 x 1/4" |
| Outputs | 2 x 1/4" (Speaker Outputs) |
| Effects Loop | Yes |
| Footswitchable | Yes |
Critical safety warnings including dangerous voltage and important operating instructions.
Numbered instructions covering safe use, maintenance, and environmental considerations.
Controls for powering the amplifier on/off and putting it into play mode.
Describes controls for gain, volume, EQ, and channel switching on the front panel.
Details on the series FX loop, send/return jacks, and line out functionality.
Speaker outputs, mains input, main fuse, and HT fuse descriptions.
Details amplifier and tube warranty terms, coverage, and exclusions.
Steps for returning products for warranty service, including obtaining an authorization number.
Information on how to contact Friedman for questions and support.
Instructions for completing warranty registration for safety notifications.
To Next Page
