7
OPERATION
Your Air Purifier operates in 2 separate modes:
Normal Operating Mode:
When you turn your Air Purifier on, it will enter into “Normal Operating mode” by default.
• Fan Speed: Medium is default setting, but you can adjust by pressing the desired speed level (HIGH,
MED or LOW).
• Air Quality Sensor: The Sensor Light is on by default, press AIR QUALITY SENSOR button to turn off.
• Plasma Generator: On by default, press PLASMA button to turn off.
Intelligent Auto Operation:
Intelligent Auto Operation senses air quality and day or night for intelligent fan speed control. Enter
Intelligent Auto Operation by pressing the “AUTO” button. To exit auto mode, press any of the fan speed
buttons (HIGH, MED, or LOW).
When entering into the auto mode, the machine will select the day or night mode automatically. Day
mode is the default.
If your Air Purifier is in the “Auto - Day” mode and detects darkness for 3 consecutive minutes, it will
enter into Night mode. If your Air Purifier is in the “Auto - Night” mode and detects light for 5 consecutive
minutes, it will enter into Day mode.
To Next Page
Loading...
Need help?
General
