Friedrich MR12Y3H User Manual (English)

Other manuals for Friedrich MR12Y3H

Questions and Answers:

S
Steven SandovalAug 13, 2025
Why is my Friedrich MR12Y3H Air Conditioner cooling poorly?
- H
  hollowaytrevorAug 14, 2025
  Several factors can impact the cooling performance of your Friedrich air conditioner: * Check if the air filter is dirty. * Ensure that the air conditioner’s intake grille or outlet port isn't blocked. * Verify that the room temperature settings (thermostat) are correctly adjusted. * Make sure no windows or doors are open. * If sunlight is entering, close the curtains. * Consider if there are heating appliances, computers, or too many people in the room. * Check if the unit is set to SUPER QUIET operation.
P
Paula GutierrezAug 17, 2025
Why is the airflow weak or stopping in my Friedrich Air Conditioner?
- C
  Caroline SmithAug 17, 2025
  Weak or stopped airflow in your Friedrich air conditioner can occur due to several reasons: * When heating starts, the fan speed is temporarily very low to allow internal parts to warm up. * During heating, if the room temperature rises above the thermostat setting, the outdoor unit will stop, and the indoor unit will operate at a very low fan speed. * During heating, the indoor unit will temporarily stop operation (between 7 and 15 minutes) as the Automatic Defrosting mode operates. * The fan may operate at very low speed during Dry operation or when the unit is monitoring the room’s temperature. * During SUPER QUIET operation, the fan will operate at very low speed. * In the monitor of AUTO operation, the fan will operate at very low speed.
R
Robert AdamsAug 21, 2025
Why doesn’t my Friedrich Air Conditioner operate immediately?
- D
  Daniel SilvaAug 21, 2025
  Your Friedrich air conditioner may not operate immediately for these reasons: * If the indoor unit is stopped and then immediately started again, the compressor will not operate for about 3 minutes to prevent fuse blowouts. * When the Power Supply Plug is disconnected and then reconnected, the protection circuit will operate for about 3 minutes, preventing unit operation during that period.
J
John HinesAug 25, 2025
What to do if my Friedrich MR12Y3H Air Conditioner doesn’t operate at all?
- H
  heatherwelchAug 25, 2025
  If your Friedrich air conditioner isn’t operating, check the following: 1. Ensure the Power Supply Plug is properly connected to its outlet. 2. Check for a power failure. 3. See if a fuse has blown out or a circuit breaker has been tripped. 4. Verify if the timer is operating.
J
Jonathan EvansAug 28, 2025
Why is there noise coming from my Friedrich MR12Y3H?
- A
  Angel Bradley DDSAug 28, 2025
  The noises from your Friedrich air conditioner can be normal: * You might hear water flowing in the air conditioner’s piping during or immediately after operation. * A slight squeaking sound may occur due to minute expansion and contraction of the front panel caused by temperature changes. * During Heating operation, a sizzling sound may be heard occasionally, which is produced by the Automatic Defrosting operation.
J
jenniferjonesSep 1, 2025
Why is my Friedrich MR12Y3H Air Conditioner emitting mist or steam?
- K
  Kyle MontoyaSep 1, 2025
  Mist or steam emitted from your Friedrich air conditioner can be normal. During Cooling or Dry operation, a thin mist may appear due to the sudden cooling of room air. During Heating, steam may rise from the outdoor unit during Automatic Defrosting.
A
Amy AlvarezSep 5, 2025
Why is water being produced from the outdoor unit of my Friedrich MR12Y3H?
- D
  Debra JonesSep 5, 2025
  During Heating operation, water may be produced from the outdoor unit of your Friedrich air conditioner due to Automatic Defrosting operation.
C
christine58Sep 8, 2025
Why does my Friedrich MR12Y3H smell?
- J
  jonesrobertSep 9, 2025
  Some smell may be emitted from your Friedrich air conditioner's indoor unit. This smell results from room odors (furniture, tobacco, etc.) that have been taken into the indoor unit.

Friedrich MR12Y3H Specifications

General

Energy Efficiency Ratio (EER)	11.0
Voltage	115V
Operating Frequency	60 Hz
Cooling Capacity	12, 000 BTU
Cooling Area	550 sq ft
Plug Type	5-15P

Summary

Safety Precautions

Features and Functions

Inverter Technology

Features efficient operation with variable power output for comfort and economy.

Coil Dry Operation

Dries the indoor unit to prevent mold growth and restrain bacteria.

Auto Changeover

Automatically switches between Cooling, Dry, and Heating modes to maintain set temperature.

Minimum Heat Operation

Maintains a minimum room temperature at 50°F to prevent excessive cooling.

Program Timer

Allows integration of ON and OFF timer operations within a 24-hour period.

Swing Operation

Automatically adjusts airflow direction louvers for even air distribution.

Removable Intake Grille

Facilitates easy cleaning and maintenance of the indoor unit's air intake.

Mildew-Resistant Filter

Air filter treated to resist mildew growth for cleaner air and easier care.

Super Quiet Operation

Reduces indoor unit airflow for quieter operation when the FAN button is set to QUIET.

Sleep Timer

Automatically adjusts temperature settings and turns off the unit after a set time.

Wireless Remote Control Unit

Provides convenient control over indoor unit operation via a wireless remote.

Wired Remote Control Unit (Option)

Optional wired control unit offering additional functions and connectivity.

Component Identification

Indoor Unit Parts

Identifies parts of the indoor unit using Fig 1.

Outdoor Unit and Remote Control Details

Outdoor Unit Parts

Identifies parts of the outdoor unit using Fig 5.

Remote Control Display Indicators

Explains indicators on the remote control display (Fig 7).

Setup and Preparation Procedures

Battery Installation and Clock Setting

Instructions for loading batteries and setting the current time.

Remote Control Holder Mounting

Steps for mounting the remote control unit holder.

Operating the Air Conditioner

Selecting and Adjusting Operation Modes

How to choose mode, set thermostat, and fan speed.

Operation Details

Stopping Air Conditioner Operation

Steps to turn off the air conditioner.

Understanding Auto Changeover and Modes

Explains auto changeover logic and specific mode functions.

Timer Functions

Setting ON/OFF and Program Timers

How to set single timers and program sequences.

Managing Timer Operations

Canceling, changing settings, and stopping timer operations.

Sleep Timer Functionality

Using and Managing the Sleep Timer

Steps for setting, changing, canceling, and stopping sleep timer.

Sleep Timer Operation Details

Explains how the sleep timer modifies temperature settings.

Airflow Direction Adjustment

Vertical Airflow Adjustment

Adjusting the up-down direction of airflow using the SET button.

Horizontal Airflow Adjustment

Manually adjusting the right-left louvers.

Special Operation Modes

Minimum Heat Operation

Maintains a minimum room temperature at 50°F to prevent excessive cooling.

Economy Operation

Optimizes operation for energy saving.

Additional Operation Features

Swing Operation

Automatic up and down airflow direction adjustment.

Coil Dry Operation

Dries the indoor unit to prevent mold and bacteria.

Manual Auto Operation

Controls the unit using main unit buttons when remote is lost.

Cleaning and Maintenance

Cleaning the Intake Grille

Steps for removing and cleaning the intake grille.

Cleaning and Replacing the Air Filter

Instructions for cleaning or replacing the air filter.

Troubleshooting Guide

Unit Not Operating or Noisy

Addresses issues like no operation, noise, smells, and mist.

Airflow and Water Issues

Covers weak airflow, mist emission, and outdoor unit water production.

Troubleshooting and Operating Tips

Performance and Control Issues

Checks for poor cooling and unit behavior discrepancies.

Operating Tips and Performance Advice

Guidance on heating performance, defrosting, and auto restart.

Operating Tips and Specifications

Temperature and Humidity Ranges

Recommended outdoor/indoor temperature and humidity ranges for operation.

Technical Specifications

Electrical and capacity specifications for the models.

Related product manuals

Friedrich MULTI ZONE MR24DY3JMA

274 pages

Friedrich MR12Y3H User Manual

Table of Contents

Other manuals for Friedrich MR12Y3H

Questions and Answers:

Friedrich MR12Y3H Specifications

Summary

Safety Precautions

Features and Functions

Inverter Technology

Coil Dry Operation

Auto Changeover

Minimum Heat Operation

Program Timer

Swing Operation

Removable Intake Grille

Mildew-Resistant Filter

Super Quiet Operation

Sleep Timer

Wireless Remote Control Unit

Wired Remote Control Unit (Option)

Component Identification

Indoor Unit Parts

Outdoor Unit and Remote Control Details

Outdoor Unit Parts

Remote Control Display Indicators

Setup and Preparation Procedures

Battery Installation and Clock Setting

Remote Control Holder Mounting

Operating the Air Conditioner

Selecting and Adjusting Operation Modes

Operation Details

Stopping Air Conditioner Operation

Understanding Auto Changeover and Modes

Timer Functions

Setting ON/OFF and Program Timers

Managing Timer Operations

Sleep Timer Functionality

Using and Managing the Sleep Timer

Sleep Timer Operation Details

Airflow Direction Adjustment

Vertical Airflow Adjustment

Horizontal Airflow Adjustment

Special Operation Modes

Minimum Heat Operation

Economy Operation

Additional Operation Features

Swing Operation

Coil Dry Operation

Manual Auto Operation

Cleaning and Maintenance

Cleaning the Intake Grille

Cleaning and Replacing the Air Filter

Troubleshooting Guide

Unit Not Operating or Noisy

Airflow and Water Issues

Troubleshooting and Operating Tips

Performance and Control Issues

Operating Tips and Performance Advice

Operating Tips and Specifications

Temperature and Humidity Ranges

Technical Specifications

Related product manuals