Friedrich MR18DC3E User Manual (English)

Questions and Answers:

D
Donald WoodJul 28, 2025
Why is my Friedrich Air Conditioner cooling poorly?
- G
  Gary NealJul 28, 2025
  Poor cooling performance can stem from several factors. Check if the air filter is dirty or if the air conditioner's intake grille or outlet port are blocked. Ensure the room temperature settings (thermostat) are correctly adjusted. Also, consider whether a window or door is open, if bright sunlight is entering (close the curtains), or if there are heat-generating appliances or too many occupants in the room. Finally, verify that the unit isn't set to SUPER QUIET operation.
T
Tyler RobinsonAug 2, 2025
What to do if my Friedrich MR18DC3E Air Conditioner doesn’t operate at all?
- M
  markmorrisAug 2, 2025
  If your Friedrich Air Conditioner doesn't operate at all, first check for a power failure. Then, see if a fuse has blown or a circuit breaker has been tripped. Ensure the POWER switch is not in the OFF position and verify that the timer is not operating.
S
Sarah AndersonAug 6, 2025
How to fix a Friedrich MR18DC3E that doesn’t operate immediately?
- B
  Beverly ParkerAug 6, 2025
  If a Friedrich unit is stopped and then immediately started again, the compressor will not operate for about 3 minutes to prevent fuse blowouts. Also, whenever the power is disconnected and then reconnected, the protection circuit will operate for about 3 minutes, preventing unit operation during that period.
M
Michael JohnsonAug 10, 2025
Why does the airflow of my Friedrich Air Conditioner stop or become weak?
- J
  Joseph IngramAug 10, 2025
  Weak airflow or a complete stop in your Friedrich Air Conditioner can occur during Dry operation, when the unit is monitoring room temperature, or during SUPER QUIET operation or monitor AUTO operation. In these modes, the fan operates at a very low speed.
I
ijacksonAug 14, 2025
Why is my Friedrich Air Conditioner emitting mist or steam?
- W
  whernandezAug 14, 2025
  The mist or steam emitted from your Friedrich Air Conditioner during Cooling or Dry operation is a result of the sudden cooling of room air. This causes condensation and misting as the air is emitted from the unit.
J
Jorge MillerAug 18, 2025
Why does my Friedrich Air Conditioner emit smells?
- C
  Craig RandolphAug 18, 2025
  Some smell may be emitted from the indoor unit of your Friedrich Air Conditioner. This smell is the result of room smells (furniture, tobacco, etc.) which have been taken into the air conditioner.
A
Angela TuckerAug 23, 2025
What are the reasons for noise from my Friedrich MR18DC3E Air Conditioner?
- R
  Raymond WhiteAug 23, 2025
  Various noises might be heard during and after operation of your Friedrich Air Conditioner. The sound of water flowing in the piping may be audible, especially right after stopping the unit. Also, the sound of coolant flowing may be noticeable for 2 to 3 minutes after starting. A slight squeaking sound might also occur due to minute expansion and contraction of the front cover because of temperature changes.

Friedrich MR18DC3E Specifications

General

Cooling Capacity	18, 000 BTU
Energy Efficiency Ratio (EER)	12.0
Window Type	Double Hung
Operating Frequency	60 Hz
Type	Window
Cooling Area	Up to 1, 000 sq. ft.
Voltage	230V
Fan Speeds	3
Filter Type	Washable
Operating Voltage	208/230V