Need help?Do you have a question about the Friedrich MW12C1H and is the answer not in the manual?
General| Cooling Capacity | 12, 000 BTU |
|---|---|
| Heating Capacity | 11, 000 BTU |
| Seasonal Energy Efficiency Ratio (SEER) | 15.0 |
| Refrigerant | R-410A |
| Dehumidification | 3.8 pints/hour |
| Fan Speeds | 3 |
| Operating Frequency | 60 Hz |
| Power Supply | 115V, 60Hz |
| Amperage Cooling | 10.5 A |
| Watts Heating | 1, 200 W |
| CEER | 11.0 |
Details the complete, indoor, and outdoor unit model names.
Displays the outdoor unit and remote control layout.
Electrical, refrigeration, and mechanical hazards with safety warnings.
Information on fire and water damage risks and preventative measures.
Detailed technical data for both 09K and 12K BTU models.
Cooling/heating performance, frequency limits, capacity variation, and characteristic curves.
Graphs illustrating noise levels for indoor and outdoor units at different speeds.
Exploded diagram and dimensions for the indoor unit components.
Exploded diagram and dimensions for the outdoor unit components.
Illustrates the refrigerant path and components for cooling.
Wiring symbols, color codes, and circuit diagrams for units.
Detailed views and component identification of the indoor and outdoor unit PCBs.
Explains the use of each button on the remote control for unit operation.
Details on Cooling, Dry, Heating, Fan, and Auto modes, including protections.
Covers ON/OFF, Mode Selection, Temperature Settings, Sleep, Fan Control, Display, and Protection functions.
General installation warnings, placement guidelines, and electrical safety.
Step-by-step guide for mounting the indoor unit, piping, and drain hose.
Procedures for wiring, purging, leakage tests, and condensate drainage.
Checklist for ensuring correct installation before operation.
Steps to power on the unit and test cooling, heating, and fan modes.
Safety guidelines and initial confirmation steps before diagnosing issues.
Visual guides for identifying causes of startup failures and operational problems.
Explains LED indicators and error codes for fault identification.
Detailed checks for capacitor faults, IPM protection, and compressor issues.
To Next Page
