Need help?Do you have a question about the Friedrich PZE09K3SB and is the answer not in the manual?
General| Cooling Capacity | 9, 000 BTU |
|---|---|
| Energy Efficiency Ratio (EER) | 12.0 |
| Dehumidification | 1.8 pints per hour |
| Noise Level | 52/49/46 dB (Hi/Med/Lo) |
| Fan Speeds | 3 |
| Voltage | 115V |
| Operating Voltage | 115V |
| Operating Frequency | 60 Hz |
| Type | Window |
| Power Supply | 115V |
| Window Width (Min/Max) | 23-36 inches |
| Refrigerant | R410A |
Covers crucial safety warnings, hazard symbols, and potential risks to personnel.
Guidelines for avoiding equipment damage and performance issues during building phases.
Explains model number structure and decodes serial number format for unit identification.
Lists and describes key features of Friedrich digital PTAC units for enhanced comfort and efficiency.
Provides detailed performance, electrical, airflow, and physical data for various unit capacities.
Covers electrical requirements, receptacle types, and power cord information including LCDI testing.
Explains unit buttons, display, modes, fan speeds, error codes, and control panel functions.
Details the refrigeration system principles and illustrates refrigerant flow in system diagrams.
Outlines recommended periodic cleaning and inspection tasks for unit longevity and performance.
Specifies minimum clearance requirements and general guidelines for proper unit placement.
Covers procedures for installing the wall sleeve and adapting to different wall constructions.
Details the installation of drain kits and the front grille for proper function and aesthetics.
Covers chassis preparation, removal of shipping materials, and connecting the unit to power.
Checklist for verifying proper installation, component security, and initial unit operation.
Lists key considerations, required equipment, and safety for working with R-410A refrigerant systems.
Covers proper charging methods, and troubleshooting undercharge, overcharge, and restricted systems.
Describes checks for capillary tube restrictions and the operation of the check valve.
Covers description, solenoid coil testing, checking operation, and replacement of the reversing valve.
Details methods for checking compressor resistance, LRA, overloads, efficiency, and replacement procedures.
Common issues, possible causes, and solutions for general unit malfunctions.
Detailed breakdown of malfunctions and specific error codes (E2-E9) with diagnostic steps.
Addresses issues with power, control panel, sensors, compressor, and electric heater operation.
Presents wiring diagrams for 7K, 9K, 12K, and 15K Cool+ Electric Heat units.
Provides wiring diagrams for 7K, 9K, 12K, and 15K Cool+ Heat Pump units.
Explains how to use the illustrated parts catalog to identify and order components.
Lists and illustrates parts for PZE and PZH Series models with item numbers and descriptions.
Describes optional items like wall sleeves, grilles, drain kits, and thermostats for installation and upgrades.
Provides reference charts for temperature conversions and thermistor resistance values.
Details the terms, conditions, limitations, and duration of the product warranty.
Lists authorized locations for obtaining replacement parts and technical support contacts.
To Next Page