How to prevent static electricity damage to Friendess Control Systems motion control card?
To prevent static electricity from damaging the motion control card of your Friendess Control Systems, wear anti-static gloves or touch a grounded metal object before touching the control card circuit or inserting/pulling the control card.
Cost-effective CNC system for laser cutting, motion, laser, and gas control.
Outlines FSCUT4000E components like BMC228X Control Card, IO board, and height controller.
Lists components of the FSCUT4000E bus CNC system, including control cards, terminal boards, and cables.
Details the BMC228X motion control card, its specs, and installation requirements.
Describes the HPL2720E IO extend board for EtherCAT bus, its hardware resources and functions.
Explains the BCL4566E bus height controller for laser cutting capacitive followers.
Details the connection diagram for the ProCutter cutting head.
Covers wiring instructions for different laser types like IPG, Raycus, and Trumpf.
Provides step-by-step instructions for installing the BMC228X control card and its driver.
Covers cable management in drag chains, machine tool wiring, and assembly requirements.
Addresses common issues like PCIe device detection, driver installation, bus scan failures, and network alarms.
General| Control axis number | 4 |
|---|---|
| Linkage axis number | 4 |
| High power laser head | Optional |
| EtherCAT bus | Yes |
| Laser head | Support for various brands |
| External motor | Support for third-party motors |
To Next Page
