Frigelux CCO102BES - User Manual

Questions and Answers

A
angela08Sep 9, 2025
What to do if my Frigelux Freezer temperature is too warm?
- A
  Alicia HernandezSep 9, 2025
  If the temperature inside your Frigelux Freezer is too warm, it could be due to several reasons: the temperature control might be set too warm, the door may be kept open too long or opened too frequently, the door may not be closed completely, the door gasket may not seal properly, a large amount of warm or hot food might have been stored recently, or the freezer may have recently been disconnected. To fix this, turn the control to a cooler setting and allow several hours for the temperature to stabilize, open the door less often and ensure it is completely closed, check and repair the door gasket, wait until the freezer has had a chance to reach its selected temperature, and allow the freezer to cool down completely (about 4 hours).
T
Timothy BrownAug 23, 2025
Why is the temperature inside my Frigelux CCO102BES Freezer too warm?
- R
  Rachel ReedAug 23, 2025
  If the temperature inside your Frigelux Freezer is too warm, the temperature control might be set too warm. Try turning the control to a cooler setting and allow several hours for the temperature to stabilize. Also, avoid keeping the door open too long or opening it too frequently. Make sure the door is completely closed and the door gasket seals properly. A large amount of warm or hot food recently stored could also be the cause; wait until the freezer has had a chance to reach its selected temperature. If the freezer has recently been disconnected, allow 4 hours for it to cool down completely.
A
Ana GardnerAug 25, 2025
Why does the compressor on my Frigelux CCO102BES Freezer turn on and off frequently?
- P
  Peter EllisAug 25, 2025
  If the compressor on your Frigelux Freezer turns on and off frequently, it could be due to several reasons: the room temperature may be hotter than normal, a large amount of food may have been added, or the door is opened too often or not closed completely. Also, check if the temperature control is not set correctly or the door gasket doesn't seal properly. Ensure the freezer has correct clearances and remember that if the freezer has recently been disconnected, it requires about 4 hours to cool down completely.
N
Nicholas LaneAug 27, 2025
How to stop moisture from forming on the inside walls of my Frigelux Freezer?
- J
  John ClarkAug 27, 2025
  Moisture forming on the inside freezer walls of your Frigelux Freezer can be normal if the weather is hot and humid, as this increases the internal rate of frost build-up. However, ensure that the door is not slightly open and avoid keeping the door open too long or too frequently. Also, check that the door is sealed properly.
R
Raymond RoblesAug 27, 2025
How to reduce vibrations from my Frigelux CCO102BES Freezer?
- C
  Christopher SheltonAug 28, 2025
  To reduce vibrations from your Frigelux Freezer: 1. Check that the freezer is on a level surface. 2. Ensure the floor is even and strong enough to support the freezer. 3. Level the freezer using wood or metal shims. 4. Make sure the freezer isn't touching the wall. If it is, re-level the freezer and move it away from the wall.
J
Julie JohnsonAug 29, 2025
What to do if the door of my Frigelux CCO102BES Freezer will not close properly?
- P
  Patricia LopezAug 29, 2025
  If the door of your Frigelux Freezer won't close properly, make sure the freezer is on a level surface. Also, check if the gasket is dirty and clean it. Ensure the storage basket is correctly positioned.
Q
qcrawfordSep 17, 2025
How to fix a Frigelux CCO102BES Freezer door that won't close properly?
- M
  Michele PriceSep 18, 2025
  If the door of your Frigelux Freezer will not close properly, make sure the freezer is on a level surface, clean the gasket, and reposition the storage basket.
A
adambensonSep 19, 2025
Why is moisture forming on the outside of my Frigelux CCO102BES?
- M
  Marie BrownSep 22, 2025
  Moisture forming on the outside of your Frigelux Freezer is likely due to the door being slightly open, which causes cold air from inside to meet warm, moist air from outside. Ensure the door is closed properly.
R
rachel53Sep 7, 2025
Why is my Frigelux CCO102BES Freezer compressor turning on and off frequently?
- D
  Dawn Brown DVMSep 8, 2025
  Your Frigelux Freezer's compressor might be turning on and off frequently due to several reasons: the room temperature may be hotter than normal, a large amount of food may have been added, the door may be opened too often or not closed completely, the temperature control may not be set correctly, the door gasket may not seal properly, the freezer may not have the correct clearances, or the freezer may have recently been disconnected for a period of time. To resolve this, try to reduce the room temperature, allow time for the freezer to cool down, open the door less often and ensure it is completely closed, adjust the temperature control, check and repair the door gasket, ensure proper clearances, and wait for the freezer to cool down completely (about 4 hours).
A
Aaron CamachoSep 4, 2025
Why does my Frigelux CCO102BES make a popping or cracking sound when the compressor comes on?
- D
  Deanna BellSep 4, 2025
  The popping or cracking sound your Frigelux Freezer makes when the compressor comes on is normal. It's caused by metal parts undergoing expansion and contraction, similar to hot water pipes. The sound should level off or disappear as the freezer continues to run.