To Next PageTo Next Page
Need help?Do you have a question about the Frigicoll MIH15Q4CN18 and is the answer not in the manual?
Explains visual symbols used for hazard identification and warnings, including risks associated with flammable refrigerants.
Defines hazard severity levels (Danger, Warning, Caution, Note) and their implications for user safety during operation.
Outlines essential safety measures for operation, installation, and maintenance, covering grounding, handling, and prohibited actions.
Details electrical safety standards, grounding requirements, wiring specifications, and the use of protective devices like fuses and RCDs.
Provides safety guidelines specific to R32 refrigerant systems, covering work procedures, ignition source control, and ventilation.
Lists critical safety and operational guidelines for using the air conditioner, covering installation height, environmental factors, and user conduct.
Advises on setting louver angles and room temperature for improved cooling and heating efficiency.
Defines the recommended indoor temperature and humidity ranges for optimal cooling and heating performance.
Describes common operational sounds and visual effects that are not indicative of a malfunction.
Explains the various displays and indicators shown on the unit's panel during different operating modes and fault conditions.
Outlines essential safety and regulatory requirements before starting the installation process, including professional installation and grounding.
Covers safe handling procedures for the unit and guidance on choosing appropriate and forbidden installation locations.
Details the components and accessories of the air conditioning unit, with a visual diagram and part list.
Provides detailed physical dimensions of the unit and specifications for refrigerant piping connections.
Lists included accessories and requirements for locally purchased materials like pipes and insulation.
Details the initial steps including unpacking, inspection of the unit, and positioning the IDU.
Covers the process of installing the IDU, including lifting bolt installation and general mounting.
Guides through the steps of removing the air inlet grille and installing the unit's decorative panel.
Details requirements for piping length, level differences, layout, bending, and insulation for connecting IDU and ODU.
Provides instructions for installing the condensate drainage pipe, including slope, insulation, and connection methods.
Explains the procedure for conducting a water discharge test to ensure proper drainage function.
Covers essential electrical safety, grounding, power supply requirements, cable selection, and wiring practices.
Outlines methods for connecting communication lines between IDUs, ODUs, and controllers, including line diameter and topology.
Describes how to connect external components like display panels and function module adapter boards to the main control board.
Details the pre-test checks, operational test procedures for IDU/ODU, and the final inspection checklist.
Lists and defines error codes and operating status codes for troubleshooting and monitoring the unit's performance.
Explains how to use the wired controller to perform spot checks and query operational parameters.
Guides on how to adjust the unit's external static pressure settings for optimal airflow and resistance management.
Emphasizes safety precautions to be taken before performing any cleaning or maintenance tasks on the air conditioner.
Provides step-by-step instructions for removing, cleaning, and reinstalling the air filter for optimal performance.
Explains how to clean the external parts of the unit, such as air outlets and panels, using appropriate methods.
Guides on how to maintain key internal components including the electric control board, fan, motor, evaporator, and water pump.
General| Brand | Frigicoll |
|---|---|
| Model | MIH15Q4CN18 |
| Category | Air Conditioner |
| Language | English |
