To Next PageTo Next Page
Need help?Do you have a question about the Frigidaire CFMV162LMA and is the answer not in the manual?
General| Capacity | 1.6 cu. ft. |
|---|---|
| Power | 1000 Watts |
| Control Type | Electronic Touch |
| Color | Stainless Steel |
| Turntable | Yes |
| Cooking Presets | Yes |
| Child Safety Lock | Yes |
| Defrost Function | Yes |
| Power Levels | 10 |
| Voltage | 120V |
| Type | Over-the-Range |
| Exterior Dimensions (W x D x H) | 29.875" x 15.375" x 16.5" |
Crucial safety precautions for installation and operation.
Details on voltage, amperage, and circuit needs for safe operation.
Guidelines for handling and reporting damage during transit or installation.
Inventory of all components provided with the appliance.
List of necessary tools for a successful and safe installation.
Specifies the required clearances and dimensions for installation.
Instructions for locating and marking the wall for the mounting plate.
Methods for locating wall studs to ensure secure mounting.
Procedures for deciding the precise position of the wall plate.
Steps for correctly positioning and marking the wall plate for drilling.
Securing the mounting plate to the wall using appropriate hardware.
Drilling necessary holes in the top cabinet for installation.
Reconfiguring the blower unit for vertical exhaust.
Verifying the proper function of the exhaust damper.
Lifting and securing the microwave to the installed mounting plate.
Fine-tuning the exhaust adaptor for duct connection.
Connecting the microwave's exhaust to the house ducting system.
Cutting an opening in the rear wall for exhaust ducting.
Detaching the blower plate from the microwave unit.
Securing the mounting plate to the wall for back exhaust.
Preparing the top cabinet for the microwave's installation.
Reconfiguring the blower unit for horizontal exhaust.
Installing the microwave onto the prepared mounting structure.
Securing the mounting plate to the wall for non-vented installation.
Preparing the top cabinet for mounting the microwave.
Ensuring the blower plate is correctly installed on the unit.
Attaching the microwave oven to the top cabinet.
Replacing or installing the charcoal filter for air recirculation.
Final check to confirm the microwave is installed correctly per instructions.
Advises reading the separate manual for operational guidance.
Removing all protective packaging before operation.
Placing the glass tray and turntable ring inside the oven cavity.
Reconnecting the main power by replacing the fuse or turning on the breaker.
Plugging the power cord into a properly grounded electrical outlet.
Retaining the installation guide for the local inspector's records.
Completing and submitting the product registration card.
