ENGLISH
BEVERAGE CENTER CARE
REINSTALLING/USING BEVERAGE CENTER AGAIN
IMPORTANT: If the beverage center has been placed in a horizontal or
tilted position for any period of time, wait 30 minutes before plugging in the
beverage center to allow the refrigerant to settle.
1. Clean beverage center. See Cleaning.
2. Place beverage center in desired location and level. See Installation
Instructions.
3. Plug into a grounded 3 prong outlet.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove the ground prong from the power cord plug.
Do not use an adapter.
Do not use an extension cord.
Failure to do so can result in death, fire or electrical shock.
To Next Page
Loading...
