7
OPERATING INSTRUCTIONS
HANDLE INSTALLATION GUIDE
1. Remove the package containing two handle parts and 2 screws from the unit.
A. Handle Seat.
B. Handle.
B
A
2. Use a screwdriver to secure the Handle Base Plate to the Refrigerator Door using the two
Screws provided.
3. Insert the handle into the handle base plate by firmly pushing the handle into the base plate.
The handle will be correctly installed when you hear a click sound as the handle is secured.
4. Push and pull the handle to make certain the handle has been properly installed.
Repeat Step 3 if required.
To Next Page
Loading...
Need help?
General
