Why is my Frigidaire EFWC505 not operating?
If your Frigidaire Water Dispenser isn't working, it might not be properly plugged into the power outlet. Check the power connection to ensure it is secure. Also, inspect the circuit breaker or fuse box; a tripped breaker or blown fuse can also prevent the unit from operating. Reset the circuit breaker or replace the fuse if necessary.
What to do if my Frigidaire EFWC505 Water Dispenser is not cold enough?
If your Frigidaire Water Dispenser isn't dispensing cold water, first, check that the cold switch on the back of the unit is turned on. Additionally, ensure that the water dispenser has enough clearance around it for proper ventilation.
What to do if my Frigidaire Water Dispenser is making too much noise?
Some noise from your Frigidaire Water Dispenser is normal. The flow of refrigerant can cause a rating noise, and the contraction and expansion of internal walls can lead to popping and cracking sounds. However, if the noise seems excessive, make sure the water dispenser is level. If it is not, adjust it until it is.
Why does my Frigidaire EFWC505 compressor turn on and off frequently?
If the compressor in your Frigidaire Water Dispenser is cycling on and off frequently, it could be due to a couple of reasons. The room temperature might be higher than normal, which can cause the compressor to work harder and cycle more often. Try to reduce the room temperature. Also, ensure that the water dispenser has enough clearance around it, as insufficient clearance can also cause this issue.
How to fix vibration in Frigidaire EFWC505 Water Dispenser?
To address vibration issues with your Frigidaire Water Dispenser, check to make sure that it is level. Adjust the leveling feet as needed until the unit sits firmly and does not vibrate.
Why is the hot water in my Frigidaire EFWC505 Water Dispenser not hot enough?
If the hot water from your Frigidaire Water Dispenser isn't hot enough, check to be sure the hot switch on the back is turned on.
General| Brand | Frigidaire |
|---|---|
| Model | EFWC505 |
| Category | Water Dispenser |
| Language | English |
Properly place the cooler, insert water bottle, and initiate water flow.
Understand heating/cooling switches, indicators, and temperature regulation.
Interpreting heating, cooling, and shortage indicators for system status.
Step-by-step guide for replacing the water bottle and changing water.
Learn how water shortage indicator lights signal water level status.
Follow placement, handling, electrical, and usage safety rules.
Instructions for cleaning the dispenser exterior, condenser, and water tanks.
Warnings regarding supply cord, refrigerant circuit, and internal appliances.
Key measurements for the water dispenser including depth, height, and width.
Schematic representation of the electrical components and connections.
To Next Page
