1. To clean the outer surface of the popcorn maker, use a soft damp cloth and dry it
afterwards with a dry towel. Do not use abrasive creams, steel wool or scouring
pads. Clean only after unplugging the popcorn maker from the mains supply.
2. Wipe the interior of the popcorn maker with a dry cloth, being careful not to allow
any water into the popping chamber, as this will damage the machine.
3. All removable parts on the popcorn maker should be detached and cleaned
thoroughly in warm, soapy water at regular intervals.
CLEANING & MAINTENANCE
8
CLEANING & MAINTENANCE
To Next Page
Loading...
