How to operate
1.Place the ice shaving
chamber into the top of the
main body. This may require
some adjustment as this will
only fit in if the position is
correct.
2.Once firmly in place, lock
the canister using the knob
on top. This will click into
place when fully locked will
only fit in if the position is
correct.
3.Now place the mixing
paddle into the jug as
shown above.
4.Choose your desired liquid.
Using the clear markings, fill
the jug to the desired amount.
5.Place the jug into the
machine as shown in the
image and rotate clockwise.
6.It is important the jug
looks like the above image
and is pushed as far clockwise
as it will go.
To Next Page
Loading...