Cycle Options
energ_
_awt
cancel
outions
5p_n soil
temp speed Level
÷ add
steam
samt_ze _ma× _ n aX
• _ stain
ho_ • high _ heavy c_ean
warm _ medium
:old _ LOW _ [;grll
#esh
COrd water , no star _extra _ nnse
dean light
e _ea_
washer
_e#tro[
To add options, press the corresponding options buttons
to illuminate the selections desired. To delete options,
press the options buttons again and the indicator lights
will turn off. Some options require a "press & hold"
effort to activate or deactivate the secondary function.
Not all options are available on every model. To protect your
fabrics, not all options are available with every cycle. If an
option is not appropriate for the cycle, the indicator will not
light. Occasionally, a setting and option in the same cycle
will conflict with each other, like add steam and energy
saver. When this happens, the option selected first will
cause the conflicting option to not be selectable.
This option has been certified by NSF International,
an independent third party testing and certification
organization dedicated to public health, safety and
....environmental protection. ..............................................................................................................................................................................................
NSF Protolcol P351
Allergen Reduction Performance
of Residential and Commercial,
Family-Sized Clothes Washers
To change the options after the cycle starts, press pause,
adjust the setting and press START to resume the cycle.
allergy (on select models)
If you have asthma or allergy sufferers in your home,
add this option to combine hot water temperature
(boosted with internal heater), fast speed tumbling and
multiple rinses to help ensure the destruction of dust
mites and removal of pet dander.
The allergy option will kill all dust mites and eliminate
at least 95% of pet dander. Since higher temperatures
are required, please check fabric care labels to prevent
damage.
energy saver
The energy saver option reduces the warm water
temperature a few degrees to save energy and also
extracts more water to reduce drying time.
To Next Page