MATCHINGSTORAGE PEDESTAL*
ClassicWhite Pedestal- P/N CFPWD15W
ClassicBluePedestal- P/N CFPWD15N
ClassicRedPedestal- P/N CFPWD15R
ClassicSilver Pedestal- P/NCFPWD15A
ClassicBlack Pedestal- P/N CFPWD15B
A storage pedestal accessory, specifically designed for this dryer
may be used to elevate the dryer for ease of use. This pedestal will
add about 15" (38 cm) to the height of your unit for a total height
of51.25"(130cm).
*Other colors may be available. Contact the source where you purchased your
dryer.
DRYER STACKING KIT
P/N134700400
Dependingon the model you purchased,a kitforstackingthisdryer
on top of matching washer may have been included in the initial
purchase of your dryer. If your model did not include a stacking kit or
you desire another stacking kit, you may order one.
LP CONVERSION KIT
P/NPCK4200
Gas dryersintendedforuse ina locationsuppliedwithLP must use a
conversionkitpriorto installation.
MOBILE HOME INSTALLATION KIT
P/N 137067200
Installationina mobilehome requiresthe use ofa MOBILE HOME
INSTALLATION KIT.
DRYING RACK
P/N 137067300
Depending on the model you purchased, a drying rack may have been
included in the initial purchase of your dryer. If your model did not
include a drying rack or you desire another drying rack, you may order
one.
UNIVERSAL APPLIANCE WRENCH
P/N137019200
A UNIVERSAL APPLIANCE WRENCH isavailabletoaidindryer/
washer/pedestalfeetadjustment.
TOUCH UP PAINT PENS*
ClassicWhite TouchUp Pen- P/N5304468812
ClassicRedTouch UpPen - P/N 5304471227
ClassicBlue Touch Up Pen- P/N 5304471229
ClassicSilverTouch Up Pen - P/N 5304471228
ClassicBlackTouch Up Pen- P/N5304458932
*Other colors may be available. Contact the source where you purchased your
dryer.
Failure to use accessories manufactured by
(orapproved by)the manufacturercould
resultinpersonalinjury,propertydamage or
damage to the dryer.
//
/i/
Replacement parts:
If replacements parts are needed for your washer,
contact the source where you purchased your washer or
refer to your Use and Care Guide for more information.
ELECTRICAL SHOCK HAZARD
Label all wires prior todisconnection when servicing
controls. Wiring errors can cause improper and dangerous
operation. Verify proper operation after servicing.
To Next Page
Loading...
