Getting Started
SE ING CLOCKAT POWERUP
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
When the unit is first plugged in, or when the power supply to the range has been interrupted,
the timer in the display will flash with "12:00". The clock cannot be set when the oven is on.
If an invalid time of day is entered, the control will triple beep to prompt you to re-enter a valid
time of day.
To set the clock (example for 1:30):
1. _ress,\lS_jj.\Uj pads toset the time ofdayto 1:30. The pads hi or io can also be pressed
to raise or lower the actual time displayed.
2. Press START <_ to accept the changes or CANCEL (@) to start with a time of 12:00.
CONTROLPANELDISP Y MODES
m [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Sleep Mode:
Your control will remain in a sleep mode when not in use. Only the clock will display during this
mode. You will need to wake the control to begin any function.
Wake Mode:
To wake the control, touch within the display panel. After 2 minutes without activity the control
will beep and go back into sleep mode.
To start a cooking feature you must first select the oven pad. User preferences will be available
during this mode as well as timer, oven light and the control lock.
TEMPE TURE VISUALDISP Y
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Your oven is equipped with a temperature visual display. When a cooking mode is set, the
actual temperature will be shown in the display and will rise as the unit preheats. When the
unit has reached its target temperature, a chime will sound to remind you to place the food in
the oven. This feature will be active with some cooking modes; bake, convection bake,
convection roast and perfect turkey. The cooking modes which does not feature the
temperature visual display will be noted in their descriptions.
NOTE: The lowest temperature that can be displayed is IO0°F.
To Next Page
Loading...
