Feature Overview
REMOVINGANDREP QNG OVEN CKS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
RemovingSliding Oven Racks
1. With the rack in its closed position; grasp the rack and the sliders at once.
2. Slightly lift the rack and sliders and pull it to clear the first bracket.
3. Pull the rack and sliders until the second bracket stops the rack.
4. Lift the rack and sliders and carefully remove them from the oven.
Refer to the care and cleaning section for directions on how to clean the racks.
ReplacingSliding Oven Racks
To replace the oven racks, follow the intructions above in reverse order.
[] []
i LU
I LL=
Io
i <[
Ist Bracket
2nd Bracket
Oven Rack
Oven Rack Slider
Oven Rack Support
Removing Non-Sliding Oven Racks
Simply pull the rack and slightly tilt it upward when the rack hits its stop position.
Replacing Non-SlidingOven Racks
Insert the rack into the oven rack supports by inserting the rack openings into the rack
supports. Be sure the rack is at the same position on each oven rack support on both sides.
Insert the openings
into the rack support
Always arrange the oven racks when the oven is cool (prior to operating the oven). Always use
loven m tts when us ng the oven.
To Next Page
Loading...
