P/N 134516800 (0412)
Cycle Selection (continued)
Timed Dry
This cycle provides up to 100 minutes of drying
time at high heat for regular and permanent
press items.
When drying permanent press items, turn the
cycle selector to 40-50 minutes. This is the
average time needed to dry most loads of
permanent press items.
The load tumbles without heat during the last 10
minutes of the Timed Dry cycle. Use this setting
to freshen clothing, pillows or blankets or to dust
draperies. Heat-sensitive items such as plastics,
foam rubber or similarly textured rubber-like
materials or items containing feathers or down
should be dried only with this setting.
Auto Dry
This cycle is best for regular and permanent
press items that can be tumble dried at high
heat. Drying time is determined automatically.
This cycle is best for items of similar fabric,
weight and construction.
• For items requiring more drying time, set cycle
selector on MORE DRY.
• For items requiring less drying time, set cycle
selector on LESS DRY.
When the items are dry, the heat automatically
turns off and the load is tumbled for approximately
5 minutes without heat.
Energy Saving Tips
• Keep the lint screen clean and exhaust the
dryer correctly.
• Sort laundry properly and select proper
temperature and cycle settings. Choose an
automatic dry cycle whenever possible for
accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a
partially dry load, and overdrying.
• Dry one load after another to take advantage
of a warm dryer.
• Opening the door needlessly causes warm air
to escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room
temperature is at least 45°F (7°C).
LESS
MORE
COOL DOWN
20
30
40
50
60
70
80
90
100
AUTO DRY
TIMED DRY
COOL DOWN
START
10
To Next Page
Loading...
