Frigidaire FER311FS0 - User Manual

2. Check that lint screen is clean and in
place.
3. Load the dryer. If desired, add a dryer
fabric softener sheet.
4. Close the dryer door.
5. Turn cycle selector clockwise to
desired setting.
6. Start dryer. Push the Push to Start button
for 2 seconds, or turn the Turn to Start
control clockwise to ON. Hold for 1-2
seconds and release.
7. At end of cycle, remove items immedi-
ately and hang or fold.
8. Clean lint screen after every load.
Cycle Selection
Always follow directions on fabric care labels.
To avoid fire hazard, do not use
heat to dry items containing feathers or down,
foam rubber, plastics, or similarly textured,
rubber-like materials. Use Cool Down (no heat)
setting only.
Turn cycle selector clockwise to desired cycle
and setting. Each cycle ends with a cool down
period. The heat automatically turns off and the
load continues to tumble for 5-10 minutes. This
reduces wrinkling and makes items easier to
handle during unloading.
Drying time varies depending on size and
dampness of load, weight and fabric type. Room
temperature and humidity, type of installation
and electrical voltage or gas pressure can also
affect drying time.
Before Operating Your Dryer
Read your dryer Owner's Guide. It has
important safety and warranty information. It
also has many suggestions for best drying results.
To reduce the risk of fire, electric
shock, or injury to persons, read the IMPORTANT
SAFETY INSTRUCTIONS in your dryer owner's
guide before operating this appliance.
Operating Steps
Read Drying Procedures in your Owner's
Guide. It explains these operating steps in
detail.
1. Prepare items for drying.
P/N 134516800 (0412)
OPERAOPERA
OPERAOPERA
OPERA
TING INSTRUCTIONSTING INSTRUCTIONS
TING INSTRUCTIONSTING INSTRUCTIONS
TING INSTRUCTIONS
Printed in U.S.A.
LESS
MORE
COOL DOWN
20
30
40
50
60
70
80
90
100
AUTO DRY
TIMED DRY
COOL DOWN
START
10

Summary

Before Operating Your Dryer

Operating Steps

Prepare and Load Dryer

Prepare items, check lint screen, load dryer with optional softener sheet, and close door.

Start and Complete Cycle

Select cycle, push start for 2 seconds, and remove items promptly at end of cycle.

Post-Cycle Maintenance

Clean lint screen after every load for optimal performance and safety.

Cycle Selection

General Cycle Operation

Turn cycle selector to desired setting; each cycle includes a cool down period to reduce wrinkling.

Timed Dry Cycle

Provides up to 100 minutes of drying at high heat; suitable for freshening or heat-sensitive items.

Auto Dry Cycle

Best for regular/permanent press items at high heat; drying time is automatic and determined by load.

Energy Saving Tips

Frigidaire FER311FS0 Specifications

General

Brand	Frigidaire
Model	FER311FS0
Category	Dryer
Language	English