15
DOOR REMOVAL/REVERSAL
(UNITS WITH TEMPERATURE CONTROL OUTSIDE)
26. Pry out the hinge bearing from
the top of the freezer door with a
flathead screwdriver (see Figure
10A). Install the hinge bearing on
the opposite side of the door (see
Figure 10B).
Figure 10
A
B
27. Reattach the top hinge (B) onto the
left side of the cabinet, using a 5/16"
wrench. Replace the top hinge cover
(A) (see Figure 11).
Figure 11
A
B
CAUTION
Raise the freezer to the upright position
and allow 1 hour before plugging the
unit back into electrical outlet.
28. Plug the freezer power cord back
into the electrical outlet.
To Next Page
Loading...
