7. Remove the sleeves from the top right of doors and hole cap from top left of doors,
and assemble them on the other side.
8. Remove the refrigerator door stopper and install it on the other side of the door.
Remove the freezer door self-locking block and stopper ，save them to reuse
take out the left self-locking block and stopper from the accessory bag in the refrigerator and
installed on the left of door.
9. Put down the refrigerator door bottom hinge vertically, take out the middle hinge of the other side
from the accessory bag then assemble the middle hinge on.
Attach the left center hinge
Self-locking
Stopper
Stopper
Hole cap
Sleeves
sleeves
DOOR REVERSAL
7
To Next Page
Loading...
