NOTE
When rst turning the refrigerator on, adjust
the control to . After 24
hours, adjust the controls as needed.
IMPORTANT
NOTE
If your unit is in a garage or area where the tem-
perature is below 55°F, adjust the freezer control
to the coldest setting to improve performance.
Freezer Control
CONTROLS AND SETTINGS
Cool Down Period
Refrigerator & Freezer Controls
Temperature Adjustment
Adjust the temperature gradually: adjust
the knob in small increments, allowing the
temperature to stabilize.
• For colder temperatures, adjust the knob
towards COLDER.
• For warmer temperatures, adjust the
knob towards COLD.
Adjusting the refrigerator control will change
temperatures in both compartments. The
freezer control can be left at the factory preset
( ) or adjusted as desired.
To maintain temperatures, a fan circulates air
in the refrigerator and freezer compartments.
For good circulation, do not block cold air vents
with food items.
Refrigerator Control
Before initial start, keep unit still for 30
minutes. To ensure safe food storage,
allow the refrigerator to operate with the
doors closed for at least 8 hours before
loading it with food.
Mid
COLD COLDER
TEMP.
CONTROL
COLD
SET
COLDE ST
STAND BY
Hold SE T-but ton for 3 -s ec
for sta ndby
Temperature
Control
Recommended
Recommended
Recommended
Recommended
When the refrigerator is running, press
the temperature setting button(SET) for
3s, the refrigerator enter into standby
mode, meanwhile ,the standby indicator
shine.
When the refrigerator is in standby
mode , s h o rt pre s s t h e t empe rat u r e
setting button(SET), the refrigerator
resume normal running, meanwhile, the
standby indicator light goes out.
To turn off power to your refrigerator,
you must unplug the power cord from the
wall outlet.
9
To Next Page
Loading...
Need help?
General
Weight and Dimensions
