Frigidaire FGGF3058RFA User Manual

14
SETTING OVEN CONTROLS
Setting the clock
When the appliance is powered up for the rst time
or when the electric supply to the appliance has been
interrupted, the display will ash “12:00” (Fig. 1).
Changing between 6-Hour Energy Saving
or continuous bake mode settings
The oven control is factory preset with to the 6 Hour
Energy Saving mode that will automatically turn the oven
off after 6 hours. The control may also be programmed to
override this feature to continuously bake.
To switch between 6-Hour Energy Saving or
continous bake modes:
Step Press
1. Press and hold timer on • off
for 6 seconds.
2. Press self-clean
to toggle between “6 Hr OFF”
(Fig. 2) or “StAY On” (Fig. 3)
and release keypad.
3. Press start to accept.
Fig. 2 Fig. 3
Setting 12 or 24 hour display mode
The oven control is factory preset to show the time of
day with a 12 hour clock. This setting may be changed to
provide the time of day with a 24 hour clock.
To set 12 or 24 hour display mode:
Step Press
1. Press and hold set clock
for 6 seconds.
2. Press self-clean
to toggle between “12 Hr dAY” or
“24 Hr dAY” display modes
(See Figs. 4 & 5) and release
keypad when the mode you prefer
is displayed.
3. Press start to accept.
Fig. 4
Fig. 5
NOTES
• Be sure to set the clock with the correct time of day
before using the oven.
• The clock cannot be adjusted when the oven is active
with any cooking function or during self-clean.
Changing between the 6-Hour Energy Saving or
continuous bake mode will not change how the cooktop
controls operate.
NOTE
To set the clock for 1:30:
Step Press
1. Press set clock.
2. Enter 1 3 0.
3. Press start to accept.
Fig. 1

Frigidaire FGGF3058RFA Specifications

General

Brand	Frigidaire
Model	FGGF3058RFA
Category	Ranges
Language	English