CARE CLEANING
Replacing LED Lights (se ectmode s)
The fresh food compartments of your refrigerator may have
LED lights. Always use Frigidaire parts for replacement.
To replace LED Lights:
1 Unplug your refrigerator's power cord.
2 Remove light cover by pushing up and out.
3 Hold the LED cover with one hand and pull the
connector with the other hand while pressing the
connector latch.
4 Replace LED light and snap in place assuring the
light is facing in toward the unit (inside fresh food).
LED Light Removal
To replace light bulbs:
1 Unplug your refrigerator's power cord.
:2 Wear protective gloves.
3 Remove light cover, if necessary.
4 Unscrew and replace old bulb with an appliance bulb
of the same type and wattage (normally 40 watts).
5 Replace light cover, if necessary.
6 Plug in the refrigerator's power cord.
Light
Ligh_Cover Bulb
Refrigerator Light
LightSocket
L_ted in Upper
Freezer Se_lon
Bulb A_Jt_. _:J_
Light Cover
Freezer Light
LED Light Harness Removal
NOTE
LED lights are in series so if one is bad or unplugged,
several lights may not light up.
Replacing Light Bulbs (selectmod s)
Both the freezer and fresh food compartments of your
refrigerator include incandescent light bulbs that will need
replacing from time-to-time. Some lights have covers that
need to be removed before replacing the bulbs. Always
use bulbs that are designed for appliance lighting.
CAUTION
Wear gloves when replacing incandescent light bulbs to
avoid getting cut.
32
Back Wall Lights
Ordering Replacement LED Lights
Order new LEDs by calling 877-808-4195, online at wvvw.
frigidaire.corn/store, or through the dealer where you
bought the refrigerator. Here is the product number to
request when ordering:
LED Light, Part #24.1891102
Incandescent Lights (40=watt bulb), Part
#5305514148
To Next Page
Loading...
