Frigidaire FGHB2866PF6 - Ice Chute Extension

Ice Chute Extension (select models)
The ice chute extension is designed to better
direct ice flow into containers.
/
Removing the Ice Chute Extension
For Cleaning
1 Turn the refrigerator off using the button
on the control panel (refer to the "Controls"
section of this Manual).
2 Press inward firmly on the front of the chute
and pull down.
3 Turn your refrigerator back on.
Press
Firml'
Installing the Ice Chute Extension
1 Turn the refrigerator off using the button
on the control panel (refer to the "Controls"
section of this Manual).
2 Align the extension with the ice chute so that
the snap clips are just inside the front edge of
the chute.
3 Push upward until the extension snaps into
place.
4 Turn your refrigerator back on.
Push Upward Until the
Extension Snaps In Place
Pull Down