Frigidaire FGUS2642LF Important Safety Instructions

7


Ifyourrefrigeratorwillnottthroughanentrancearea,youcanreduceitssizebyremovingthedoors.Checkrstby
measuring the entrance.

You will need the following tools:

 Make sure the electrical power cord is unplugged from the wall outlet.
2 Open both doors and remove the toe grille (as explained in the Installation
Instructions that came with your appliance).
3 Remove any food from the door shelves.
4 Close the doors.

 Remove the three screws from each cover over the top door hinges.
2 Lift hinge cover straight up and off.

 Trace lightly around the door’s top hinge with a pencil. This makes reinstallation
easier.
2 Remove the two screws from the top hinge. Lift the door off of the bottom hinge
and set it aside.
3 Remove the two bottom hinge screws and hinge if necessary.
Adjustable
Wrench
Socket
Wrench Set
OR
Phillips Head
™
Tools Necessary:
3/8” Fixed
Wrench
AND
OR
To p Hinge
Cover Rear
Screw
To p Hinge
Cover Front
Screw
Bottom
Hinge
Screw
To p
Hinge
Screw




To reinstall the refrigerator door, reverse the above steps.

Be sure doors are set aside in a secure
position where they cannot fall and cause
personal injury.

Frigidaire FGUS2642LF Specifications

General

Brand	Frigidaire
Model	FGUS2642LF
Category	Refrigerator
Language	English