How to improve the suction performance of my Frigidaire FHPC4260LS?
If the suction performance of your Frigidaire Ventilation Hood isn't good, it could be because the distance between the appliance and the cooking place is too large. In this case you should readjust the distance. Also, the metallic anti-grease filter might be dirty, so you should clean the filters.
What to do if the light and fan on my Frigidaire FHPC4260LS aren't working?
If both the light and fan on your Frigidaire Ventilation Hood aren't working, there could be a couple of reasons. First, the light bulb might be broken, so replace it with a bulb that has the correct rating. Second, there may be a problem with the electrical connection, in which case you should check the electrical connection with an electrician.
Why is my Frigidaire Ventilation Hood vibrating excessively?
Excessive vibration in your Frigidaire Ventilation Hood could be due to a few reasons. It might not be properly fixed on the brackets, so take down the appliance and check that it is securely fixed. Alternatively, the fan blade could be damaged, in which case you should switch off the appliance and have it repaired by qualified service personnel only.
General| Color | stainless steel |
|---|---|
| Hood Type | island |
| Venting Type | convertible |
| Temperature Sensor | no |
| Number of Fan Speeds | 3 |
| CFM | 400 cubic feet per minute |
| Duct Diameter | 6 inches |
| Filters | 2 |
| Control Type | button |
| Delay Start | no |
| Interior Light | yes |
| Remote Control | no |
| Voltage | 120 volts |
| Current | 4 amperes |
Weight and Dimensions| Depth | 23 5/8 inches |
|---|---|
| Height | 30 inches |
| Width | 41 7/8 inches |
| Net Weight | 90 pounds |
Key safety guidelines for appliance operation and installation.
Covers child safety precautions and general warning statements.
Additional warnings on fire risk, ducting, and grease.
Details DANGER, WARNING, and CAUTION statements for safe operation.
Emphasizes adherence to electrical codes for installation.
Provides guidance on proper duct routing for optimal performance.
Details on creating adequate ceiling support for the hood.
Detailed steps for making electrical connections to the appliance.
Table detailing common issues, their causes, and solutions.
To Next Page
