30
40 •
50 _
6O
COOL
DOWN
20
START
LESS DRY
70 COOL
TIMED DRY DOWN
AUTOMATIC
PERM PRESS
PRESS SAVER /
FABRIC SENTRY
DRY
AUTOMATIC
REGULAR
START
TEMPERATURE
KNITS/DELICATES PERM PRESS
LOW HEAT MEDIUM HEAT
AIR FLUFF • ® REGULAR
NO HEAT HiGH HEAT
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to
tumble for 5-10 minutes. This reduces wrinkling and
makes items easierto handle during unloading.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
Automatic Perm Press/Delicates Cycle
This cycleisbest for permanent press,knit and delicate
items. Drying time isdetermined automatically at the
temperature selection of your choice.
• Medium heat is suggested for permanent press
items.
• Low heat is suggested for knit and delicate items.
Ifthe dried load cannot be removed promptly, the cycle
selector will advance to the PressSaver/Fabric Sentry
setting. Unheated tumbling continues during Press
Saver/Fabric Sentry for approximately 30 minutes to
help reduce wrinkling.
The cycle signal will sound briefly every 5 minutes as a
reminder to remove the load.
Automatic Regular Cycle
This cycle is best for cotton items that can be tumble
dried.
Drying time is determined automatically at the
temperature selection of your choice. This cycle isbest
for items of similar fabric, weight and construction.
• For items requiring more drying time, set cycle
selector on MORE DRY.
• For items requiring lessdrying time, setcycleselector
on LESSDRY.
Timed Dry Cycle
This cycle provides up to 70 minutes of drying time at
the temperature selection of your choice.
Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer
correctly.
• Sort laundry properly and select proper temperature
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially dry
load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
• Opening the door needlessly causes warm air to
escape,which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Installthe dryer inan areawhere the room temperature
is at least 45% (7°C).
P/N137227300 (0905)
To Next Page
Loading...
