8
Filter Replacement
It is recommended to wear gloves while
discarding the used filter. Place the used
filter in a plastic bag to prevent dust
fromre-entering the air.
Distinguish the front side from the back
side of the filter.
NOTE:
2. Remove the inlet grill from the unit as shown below.
4. Take the HEPA filter out of the plastic bag
and insert it into the air cleaner with the arrow
pointing inward.
5. Replace the air inlet grill onto unit as shown below
3. Grasp the left and right frame of the HEPA
filter through the reces
s on the side of the
filter enclosure, and remove the filters.
1. Release the inlet grill by pressing on the locking
switch and pull forward as shown below.
Remember to unplug the unit when replacing the filter!
To order replacement parts, visit us online at www.frigidaire.com or call 1-888-845-7330
To Next Page
Loading...
