Cycle Selection
Turn cycleselector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The
heatautomatically turns off and the loadcontinues
totumble for 5-10 minutes. Thisreduceswrinkling
and makes items easier to handle during
unloading.
Dryingtime variesdepending on sizeand dampness
of load,weight andfabrictype. Roomtemperature
and humidity, type of installation and electrical
voltage or gas pressure can also affect drying
time.
Automatic Whites Cycle
This cycle is best for cotton items that can be
tumble dried.
Drying time is determined automatically at the
temperature selection of your choice. This cycle
is best for items of similar fabric, weight and
construction.
• For items requiring more drying time, set cycle
selector on MORE DRY.
• For items requiring lessdrying time, set cycle
selector on LESS DRY.
Automatic Colors Cyde
This cycle is best for permanent press, knit and
delicate items. Drying time is determined
automatically at the temperature selection of
your choice.
Medium heat issuggested for permanent press
items.
Low heat is suggested for knit and delicate
items.
Ifthe dried load cannot be removed promptly, the
cycle selector will advance to the Press Saver
setting. Unheated tumbling continues during Press
Saverfor 40 minutes to help reduce wrinkling.
Thecycle signal will sound briefly every 5 minutes
as a reminder to remove the load. If the load is
removed before time has elapsed, turn the cycle
selector knob to Off.
Note; Usethe Automatic Whites cycle ifyou do
not want to hear the cycle signal during
PressSaver.
Timed Dry Cycle
This cycle provides up to 70 minutes of drying
time atthe temperature selection of your choice.
Energy Saving Tips
Keep the lint screen clean and exhaust the
dryer correctly.
Sort laundry properly and select proper
temperature and cycle settings. Choose an
automatic dry cycle whenever possible for
accurate drying time.
• Dryonlyfull loads. Single items and small loads
usually take longer to dry.
Avoid overloading, adding wet items to a
partially dry load, and overdrying.
Dry one load after another to take advantage
of a warm dryer.
Opening the door needlessly causeswarm air
to escape,which prolongs drying time.
If possible, usethe dryer on low humidity days.
Install the dryer in an area where the room
temperature is at least 45% (7°C).
Laundry Center Features
CONVENIENCE
HANGER%
DRYING
RACK
SAFETY
SWITCH
FIL TER
OPENING
BLEACH
DISPENSER
DYNAMIC
S YSTEM
MODEL-SERIAL
NUMBER PLATE
LID
LOCK
SOFTENER
DISPENSER
SELF-CLEANING
LINT FILTER
P/N134818800 (0611 )